The THS6022 contains two high-speed drivers capable of providing 200-mA output current (minimum) into a 50- load. These drivers can be configured differentially to drive a 50-V p-p output signal over low-impedance lines. The drivers are current feedback amplifiers, designed for the high slew rates necessary to support low total harmonic distortion (THD) in xDSL applications. The THS6022 is ideally suited for asymmetrical digital subscriber line (ADSL) at the remote terminal, high-data-rate digital subscriber line (HDSL), and very high-data-rate digital subscribe line (VDSL), where it supports the high-peak voltage and current requirements of these applications. Separate power supply connections for each driver are provided to minimize crosstalk.

The THS6022 is packaged in the patented PowerPAD™ package. This package provides outstanding thermal characteristics in a small-footprint package that is fully compatible with automated surface-mount assembly procedures. The exposed thermal pad on the underside of the package is in direct contact with the die. By simply soldering the pad to the PWB copper and using other thermal outlets, the heat is conducted away from the junction.

• ADSL, HDSL and VDSL Differential Line Driver
• 200-mA Output Current Minimum Into 50- Load
• High Speed
  • 210-MHz Bandwidth (-3-dB) at 50- Load
  • 1900-V/μs Slew Rate, G = 5
• Low Distortion
  • -69-dB Third-Order Harmonic Distortion at f = 1 MHz, 50- Load, and VO(PP) = 20 V
• Independent Power Supplies for Low Crosstalk
• Wide Supply Range ±5 V to ±15 V
• Thermal-Shutdown and Short-Circuit Protection
• Evaluation Module Available

PowerPAD, MicroStar Junior are trademarks of Texas Instruments. All other trademarks are the property of their respective owners.

• Number of channels (#)
• 2
• Architecture
• DSL Line Driver, PLC Line Driver
• Total supply voltage (Min) (+5V=5, +/-5V=10)
• 9
• Total supply voltage (Max) (+5V=5, +/-5V=10)
• 33
• BW @ Acl (MHz)
• 210
• Acl, min spec gain (V/V)
• 1
• Vn at flatband (Typ) (nV/rtHz)
• 1.7
• Vn at 1 kHz (Typ) (nV/rtHz)
• 1.8
• Iq per channel (Typ) (mA)
• 7.2
• Vos (offset voltage @ 25 C) (Max) (mV)
• 5
• Rail-to-rail
• No
• Features
• —
• Rating
• Catalog
• Operating temperature range (C)
• 0 to 70, -40 to 85
• CMRR (Typ) (dB)
• 73
• Input bias current (Max) (pA)
• 10000000
• Offset drift (Typ) (uV/C)
• 20
• GBW (Typ) (MHz)
• 210
• Output current (Typ) (mA)
• 250
• 2nd harmonic (dBc)
• 76
• 3rd harmonic (dBc)
• 80
• @ MHz
• 1

THS6022的完整型号有：THS6022CPWP、THS6022CPWPR、THS6022IPWP、THS6022IPWPR，以下是这些产品的关键参数及官网采购报价：

THS6022CPWP，工作温度：0 to 70，封装：HTSSOP (PWP)-14，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网THS6022CPWP的批量USD价格：3.743（1000+）

THS6022CPWPR，工作温度：0 to 70，封装：HTSSOP (PWP)-14，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网THS6022CPWPR的批量USD价格：3.175（1000+）

THS6022IPWP，工作温度：-40 to 85，封装：HTSSOP (PWP)-14，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网THS6022IPWP的批量USD价格：3.829（1000+）

THS6022IPWPR，工作温度：PropertyValue，封装：HTSSOP (PWP)-14，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网THS6022IPWPR的批量USD价格：3.26（1000+）

THS6022 TINA-TI Reference Design (Rev. B)

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)