The THS6214 is a dual-port, current-feedback architecture, differential line driver amplifier system ideal for xDSL systems. The device is targeted for use in very-high-bit-rate digital subscriber line 2 (VDSL2) line driver systems that enable greater than 14.5-dBm line power, supporting the G.993.2 VDSL2 17a profile. The device is also fast enough to support central-office transmissions of 14.5-dBm line power up to 30 MHz. The device is also targeted for use as a broadband or wideband power line communications (PLC) amplifier for line driver applications.

The unique architecture of the THS6214 uses minimal quiescent current and still achieves very high linearity. Differential distortion, under full bias conditions, is –93 dBc at 1 MHz and reduces to only –73 dBc at 10 MHz. Fixed multiple bias settings of the amplifiers allow for enhanced power savings for line lengths where the full performance of the amplifier is not required. To allow for even more flexibility and power savings, an adjustable current pin (I_ADJ) is available to further lower the bias currents.

The wide output swing of 43.2 V_PP (100-Ω differential load) with ±12-V power supplies, coupled with over 416-mA current drive (25-Ω load), allows for wide dynamic headroom, keeping distortion minimal.

The THS6214 is available in a VQFN-24 or a HTSSOP-24 PowerPAD™ package.

• Low Power Consumption:
  • Full Bias Mode: 21 mA per Port
  • Mid Bias Mode: 16.2 mA per Port
  • Low Bias Mode: 11.2 mA per Port
  • Low-Power Shutdown Mode
  • IADJ Pin for Variable Bias
• Low Noise:
  • Voltage Noise: 2.7 nV/√Hz
  • Inverting Current Noise: 17 pA/√Hz
  • Noninverting Current Noise: 1.2 pA/√Hz
• Low MTPR Distortion:
  • 70 dB with 20.5 dBm G.993.2—Profile 8b
• –93 dBc HD3 (1 MHz, 100-Ω Differential)
• High Output Current: > 416 mA (25-Ω Load)
• Wide Output Swing: 43.2 VPP (±12 V, 100-Ω Differential Load)
• Wide Bandwidth: 150 MHz (GDIFF = 10 V/V)
• PSRR: 50 dB at 1 MHz for Good Isolation
• Wide Power-Supply Range: 10 V to 28 V

• Number of channels (#)
• 2
• Architecture
• DSL Line Driver
• Total supply voltage (Min) (+5V=5, +/-5V=10)
• 10
• Total supply voltage (Max) (+5V=5, +/-5V=10)
• 28
• BW @ Acl (MHz)
• 160
• Acl, min spec gain (V/V)
• 1
• Vn at flatband (Typ) (nV/rtHz)
• 2.7
• Vn at 1 kHz (Typ) (nV/rtHz)
• 8.5
• Iq per channel (Typ) (mA)
• 21
• Vos (offset voltage @ 25 C) (Max) (mV)
• 50
• Rail-to-rail
• No
• Features
• Shutdown, Adjustable BW/IQ/IOUT
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 85
• CMRR (Typ) (dB)
• 65
• Input bias current (Max) (pA)
• 3500000
• Offset drift (Typ) (uV/C)
• 155
• GBW (Typ) (MHz)
• 160
• Output current (Typ) (mA)
• 416
• 2nd harmonic (dBc)
• 100
• 3rd harmonic (dBc)
• 89
• @ MHz
• 1

THS6214的完整型号有：THS6214IPWP、THS6214IPWPR、THS6214IRHFR、THS6214IRHFT，以下是这些产品的关键参数及官网采购报价：

THS6214IPWP，工作温度：-40 to 85，封装：HTSSOP (PWP)-24，包装数量MPQ：60个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网THS6214IPWP的批量USD价格：1.553（1000+）

THS6214IPWPR，工作温度：-40 to 85，封装：HTSSOP (PWP)-24，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网THS6214IPWPR的批量USD价格：1.294（1000+）

THS6214IRHFR，工作温度：-40 to 85，封装：VQFN (RHF)-24，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网THS6214IRHFR的批量USD价格：1.294（1000+）

THS6214IRHFT，工作温度：-40 to 85，封装：VQFN (RHF)-24，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网THS6214IRHFT的批量USD价格：1.553（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)