The TL16C552A is an enhanced dual-channel version of the popular TL16C550B asynchronous communications element (ACE). The device serves two serial input/output interfaces simultaneously in microcomputer or microprocessor-based systems. Each channel performs serial-to-parallel conversion on data characters received from peripheral devices or modems and parallel-to-serial conversion on data characters transmitted by the CPU. The complete status of each channel of the dual ACE can be read at any time during functional operation by the CPU. The information obtained includes the type and condition of the transfer operations being performed and the error conditions encountered.

In addition to its dual communications interface capabilities, the TL16C552A provides the user with a bidirectional parallel data port that fully supports the parallel Centronics-type printer interface. The parallel port and the two serial ports provide IBM PC/AT-compatible computers with a single device to serve the three system ports. A programmable baud rate generator that can divide the timing reference clock input by a divisor between 1 and (2¹⁶ - 1) is included.

The TL16C552A is available in a 68-pin plastic-leaded chip-carrier (FN) package and a 80-pin TQFP (PN) package. The TL16C552AM is available in a 68-pin ceramic quad flat (HV) package.

• IBM PC/ATTM Compatible
• Two TL16C550 ACEs
• Enhanced Bidirectional Printer Port
• 16-Byte FIFOs Reduce CPU Interrupts
• Up to 16-MHz Clock Rate for up to 1-Mbaud Operation
• Transmit, Receive, Line Status, and Data Set Interrupts on Each Channel Independently Controlled
• Individual Modem Control Signals for Each Channel
• Programmable Serial Interface Characteristics for Each Channel:
  • 5-, 6-, 7-, or 8-Bit Characters
  • Even, Odd, or No Parity Bit Generation and Detection
  • 1-, 1-1/2-, or 2-Stop Bit Generation
• 3-State Outputs Provide TTL Drive for the Data and Control Bus on Each Channel
• Hardware and Software Compatible With TL16C452

IBM PC/AT is a trademark of International Business Machines Corporation.

• Number of channels (#)
• 2
• FIFOs (bytes)
• 16
• Rx FIFO trigger levels (#)
• 4
• Tx FIFO trigger levels (#)
• —
• Programmable FIFO trigger levels
• No
• CPU interface
• X86
• Baud rate (max) at Vcc = 1.8 V & with 16X sampling (Mbps)
• —
• Baud rate (max) at Vcc = 2.5 V & with 16X sampling (Mbps)
• —
• Baud rate (max) at Vcc = 3.3 V & with 16X sampling (Mbps)
• —
• Baud rate (max) at Vcc = 5.0 V & with 16X sampling (Mbps)
• 1
• Operating voltage (V)
• 5
• Auto RTS/CTS
• Yes
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 85

TL16C552A的完整型号有：TL16C552AFN、TL16C552AFNR、TL16C552AIFN，以下是这些产品的关键参数及官网采购报价：

TL16C552AFN，工作温度：-40 to 85，封装：PLCC (FN)-68，包装数量MPQ：18个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TL16C552AFN的批量USD价格：3.921（1000+）

TL16C552AFNR，工作温度：PropertyValue，封装：PLCC (FN)-68，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TL16C552AFNR的批量USD价格：3.921（1000+）

TL16C552AIFN，工作温度：PropertyValue，封装：PLCC (FN)-68，包装数量MPQ：18个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网TL16C552AIFN的批量USD价格：3.921（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)