This device is fabricated using LinCMOS™ technology and consists of two independent voltage comparators, each designed to operate from a single power supply. Operation from dual supplies is also possible if the difference between the two supplies is 4 V to 18 V. Each device features extremely high input impedance (typically greater than 10¹²), allowing direct interfacing with high-impedance sources. The outputs are n-channel open-drain configurations and can be connected to achieve positive-logic wired-AND relationships.

The TLC372 has internal electrostatic discharge (ESD) protection circuits and has been classified with a 2000-V ESD rating using human-body-model (HBM) testing. However, care should be exercised in handling this device as exposure to ESD may result in a degradation of the device parametric performance.

The TLC372 is characterized for operation from -55°C to 125°C.

• Controlled Baseline
  • One Assembly/Test Site, One Fabrication Site
• Extended Temperature Performance of -55°C to 125°C
• Enhanced Diminishing Manufacturing Sources (DMS) Support
• Enhanced Product Change Notification
• Qualification Pedigree(1)
• ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 100 V Using Machine Model (C = 200 pF, R = 0)
• Single or Dual-Supply Operation
• Wide Range of Supply Voltages . . .4 V to 18 V
• Very Low Supply Current Drain . . .150 μA Typ at 5 V
• Fast Response Time . . . 200 ns Typ for TTL-Level Input Step
• Built-in ESD Protection
• High Input Impedance . . . 1012 Typ
• Extremely Low Input Bias Current. . .5 pA Typ
• Ultrastable Low Input Offset Voltage
• Input Offset Voltage Change at Worst-Case Input Conditions Typically 0.23 μV/Month, Including the First 30 Days
• Common-Mode Input Voltage Range Includes Ground
• Output Compatible With TTL, MOS, and CMOS
• Pin-Compatible With LM393

(1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.LinCMOS is a trademark of Texas Instruments.

• Number of channels (#)
• 2
• Output type
• Open-collector, Open-drain
• Propagation delay time (μs)
• 0.2
• Vs (Max) (V)
• 16
• Vs (Min) (V)
• 4
• Vos (offset voltage @ 25 C) (Max) (mV)
• 5
• Iq per channel (Typ) (mA)
• 0.075
• Input bias current (+/-) (Max) (nA)
• 0.03
• Rail-to-rail
• Out
• Rating
• HiRel Enhanced Product
• Operating temperature range (C)
• -55 to 125
• Features
• —
• VICR (Max) (V)
• 15
• VICR (Min) (V)
• 0

TLC372-EP的完整型号有：TLC372MDREP、V62/06675-01XE，以下是这些产品的关键参数及官网采购报价：

TLC372MDREP，工作温度：-55 to 125，封装：SOIC (D)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TLC372MDREP的批量USD价格：1.359（1000+）

V62/06675-01XE，工作温度：-55 to 125，封装：SOIC (D)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网V62/06675-01XE的批量USD价格：1.359（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)