The TLC5510 and TLC5510A are CMOS, 8-bit, 20 MSPS analog-to-digital converters (ADCs) that utilize a semiflash architecture. The TLC5510 and TLC5510A operate with a single 5-V supply and typically consume only 130 mW of power. Included is an internal sample-and-hold circuit, parallel outputs with high-impedance mode, and internal reference resistors.

The semiflash architecture reduces power consumption and die size compared to flash converters. By implementing the conversion in a 2-step process, the number of comparators is significantly reduced. The latency of the data output valid is 2.5 clocks.

The TLC5510 uses the three internal reference resistors to create a standard, 2-V, full-scale conversion range using V_DDA. Only external jumpers are required to implement this option and eliminates the need for external reference resistors. The TLC5510A uses only the center internal resistor section with an externally applied 4-V reference such that a 4-V input signal can be used. Differential linearity is 0.5 LSB at 25°C and a maximum of 0.75 LSB over the full operating temperature range. Typical dynamic specifications include a differential gain of 1% and differential phase of 0.7 degrees.

The TLC5510 and TLC5510A are characterized for operation from -20°C to 75°C.

• Analog Input Range
  • TLC5510...2 V Full Scale
  • TLC5510A...4 V Full Scale
• 8-Bit Resolution
• Integral Linearity Error ±0.75 LSB Max (25°C) ±1 LSB Max (–20°C to 75°C)
• Differential Linearity Error ±0.5 LSB Max (25°C) ±0.75 LSB Max (–20°C to 75°C)
• Maximum Conversion Rate 20 Mega-Samples per Second (MSPS) Max
• 5-V Single-Supply Operation
• Low Power Consumption TLC5510...127.5 mW Typ TLC5510A...150 mW Typ (includes reference resistor dissipation)
• TLC5510 is Interchangeable With Sony CXD1175
• applications
  • Digital TV
  • Medical Imaging
  • Video Conferencing
  • High-Speed Data Conversion
  • QAM Demodulators

• Sample rate (Max) (MSPS)
• 20
• Resolution (Bits)
• 8
• Number of input channels
• 1
• Interface type
• Parallel CMOS
• Analog input BW (MHz)
• 14
• Features
• Low Power
• Rating
• Catalog
• Input range (Vp-p)
• 2
• Power consumption (Typ) (mW)
• 127.5
• Architecture
• Flash
• SNR (dB)
• 46
• ENOB (Bits)
• 6.8
• SFDR (dB)
• 46
• Operating temperature range (C)
• -20 to 75
• Input buffer
• No

TLC5510的完整型号有：TLC5510INS、TLC5510INSR、TLC5510IPW、TLC5510IPWR，以下是这些产品的关键参数及官网采购报价：

TLC5510INS，工作温度：-20 to 75，封装：SO (NS)-24，包装数量MPQ：34个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TLC5510INS的批量USD价格：3.989（1000+）

TLC5510INSR，工作温度：-20 to 75，封装：SO (NS)-24，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TLC5510INSR的批量USD价格：3.419（1000+）

TLC5510IPW，工作温度：-20 to 75，封装：TSSOP (PW)-24，包装数量MPQ：60个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TLC5510IPW的批量USD价格：3.704（1000+）

TLC5510IPWR，工作温度：-20 to 75，封装：TSSOP (PW)-24，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TLC5510IPWR的批量USD价格：3.134（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)