The TLC5618 is a dual 12-bit voltage output digital-to-analog converter (DAC) with buffered reference inputs (high impedance). The DACs have an output voltage range that is two times the reference voltage, and the DACs are monotonic. The device is simple to use, running from a single supply of 5 V. A power-on reset function is incorporated in the device to ensure repeatable start-up conditions.

Digital control of the TLC5618 is over a 3-wire CMOS-compatible serial bus. The device receives a 16-bit word for programming and producing the analog output. The digital inputs feature Schmitt triggers for high noise immunity. Digital communication protocols include the SPI™, QSPI™, and Microwire™ standards.

Two versions of the device are available. The TLC5618 does not have an internal state machine and is dependent on all external timing signals. The TLC5618A has an internal state machine that counts the number of clocks from the falling edge of CS\ and then updates and disables the device from accepting further data inputs. The TLC5618A is recommended for TMS320 and SPI processors, and the TLC5618 is recommended only for SPI or 3-wire serial port processors. The TLC5618A is backward-compatible and designed to work in TLC5618 designed systems.

The 8-terminal small-outline D package allows digital control of analog functions in space-critical applications. The TLC5618C is characterized for operation from 0°C to 70°C. The TLC5618I is characterized for operation from \x9640°C to 85°C. The TLC5618Q is characterized for operation from \x9640°C to 125°C. The TLC5618M is characterized for operation from \x9655°C to 125°C.

• Programmable Settling Time to 0.5 LSB 2.5 us or 12.5 us Typ
• Two 12-Bit CMOS Voltage Output DACs in an 8-Pin Package
• Simultaneous Updates for DAC A and DAC B
• Single Supply Operation
• 3-Wire Serial Interface
• High-Impedance Reference Inputs
• Voltage Output Range ... 2 Times the Reference Input Voltage
• Software Powerdown Mode
• Internal Power-On Reset
• TMS320 and SPI Compatible
• Low Power Consumption:
• 3 mW Typ in Slow Mode,
• 8 mW Typ in Fast Mode
• Input Data Update Rate of 1.21 MHz
• Monotonic Over Temperature
• Available in Q-Temp Automotive High Rel Automotive Applications Configuration Control/Print Support Qualification to Automotive Standards
• Applications
  • Battery Powered Test Instruments
  • Digital Offset and Gain Adjustment
  • Battery Operated/Remote Industrial Controls
  • Machine and Motion Control Devices
  • Cellular Telephones

SPI and QSPI are trademarks of Motorola, Inc. Microwire is a trademark of National Semiconductor Corportation

• Resolution (Bits)
• 12
• Number of DAC channels (#)
• 2
• Interface type
• SPI
• Output type
• Buffered Voltage
• Settling time (μs)
• 2.5
• Features
• —
• Reference type
• Ext
• Architecture
• String
• Rating
• Military
• Output range (Max) (mA/V)
• 5.1
• Output range (Min) (mA/V)
• 0
• Operating temperature range (C)
• -55 to 125

TLC5618AM的完整型号有：5962-9955702Q2A、5962-9955702QPA、TLC5618AMFKB、TLC5618AMJGB，以下是这些产品的关键参数及官网采购报价：

5962-9955702Q2A，工作温度：-55 to 125，封装：LCCC (FK)-20，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：Call TI，TI官网5962-9955702Q2A的批量USD价格：96.168（1000+）

5962-9955702QPA，工作温度：-55 to 125，封装：CDIP (JG)-8，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网5962-9955702QPA的批量USD价格：87.425（1000+）

TLC5618AMFKB，工作温度：-55 to 125，封装：LCCC (FK)-20，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：Call TI，TI官网TLC5618AMFKB的批量USD价格：96.168（1000+）

TLC5618AMJGB，工作温度：-55 to 125，封装：CDIP (JG)-8，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网TLC5618AMJGB的批量USD价格：87.425（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)

ANALOG-ENGINEER-CALC — 模拟工程师计算器

模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面，其中显示各种常见计算的列表（从使用反馈电阻器设置运算放大器增益到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件）。除了可用作单独的工具之外，该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。 lock = 需要出口许可（1分钟）