- 制造厂商：TI
- 产品类别：电源管理
- 技术类目：LED 驱动器 - RGB LED 驱动器
- 功能描述：具有锁存器的 8 通道源驱动器
- 点击这里打开及下载TLC59213的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The TLC59213 and TLC59213A are 8-bit source drivers with input latch with CLK input and CLR to set the output OFF. The TLC59213 and TLC59213A have large output source currents up to 500 mA with Darlington transistor and collectors tied to VCC. These feature make the device optimum level of driving the matrix of ink jet printer head, LEDs, and the scan-side of resistor’s matrix. The TLC59213 and TLC59213A differ only in the Data Hold Time Specification (th).
The clamp diode is between output and ground for switching inductive load.
All inputs are TTL/CMOS, which enable to any logic-level inputs such as MCU, CPU or SN74LV594 (serial to parallel) and the output enable LED matrix display. It can also be used with another device sink driver such as TLC59210, TLC59211 and TLC59212.
- Output Current on Each Channel (IOUT Max = –500 mA)
- VCE(sus) = 13.2 V
- Input Compatible With TTL/5-V CMOS
- Clear (CLR) and Clock (CLK) TTL/CMOS Control Inputs
- CLR Control Input to Off the Output
- Darlington Source Driver
- Clock Input Up to 1 MHz
- Enhanced Hold Time (th) on TLC59213A
- Temperature Range: –40°C to 85°C
- Number of channels (#)
- 8
- LED current per channel (mA)
- -500
- LED configuration
- Parallel, Series
- Program memory
- No
- Programmable ramp control
- No
- Vin (Min) (V)
- 4.5
- Vin (Max) (V)
- 13.2
- Iout (Max) (A)
- -4
- Features
- GPIO interface
- Iq (Typ) (mA)
- 4.6
- Operating temperature range (C)
- -40 to 85
- Rating
- Catalog
TLC59213的完整型号有：TLC59213IN、TLC59213IPWR，以下是这些产品的关键参数及官网采购报价：
TLC59213IN，工作温度：-40 to 85，封装：PDIP (N)-20，包装数量MPQ：20个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：NIPDAU，TI官网TLC59213IN的批量USD价格：0.848（1000+）
TLC59213IPWR，工作温度：-40 to 85，封装：TSSOP (PW)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TLC59213IPWR的批量USD价格：0.678（1000+）
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
