- 制造厂商:TI
- 产品类别:电源管理
- 技术类目:LED 驱动器 - LED 显示驱动器
- 功能描述:具有点校正功能与预充电 FET 的 16 通道 LED 驱动器
- 点击这里打开及下载TLC5924的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The TLC5924 is a 16 channel constantcurrent sink driver. Each channel has a On/Off state and a 128step adjustable constant current sink (dot correction). The dot correction adjusts the brightness variations between LED, LED channels and other LED drivers. Both dot correction and On/Off state are accessible via a serial data interface. A single external resistor sets the maximum current of all 16 channels.
Each constantcurrent output has a precharge FET that enables an improvement in image quality of the dynamicdrive LED display.
The TLC5924 features two error information circuits. The LED open detection (LOD) indicates a broken or disconnected LED at an output terminal. The thermal error flag (TEF) indicates an overtemperature condition.
- 16 Channels
- Drive Capability
- 0 to 80 mA (Constant–Current Sink)
- Constant Current Accuracy: ±1% (typical)
- Serial Data Interface
- Fast Switching Output: Tr / Tf = 10ns (typical)
- CMOS Level Input/Output
- 30 MHz Data Transfer Rate
- VCC = 3.0 V to 5.5 V
- Operating Temperature = –40°C to 85°C
- LED Supply Voltage up to 17 V
- 32–pin HTSSOP(PowerPAD) and QFN Packages
- Dot Correction
- 7 bit (128 Steps)
- individual adjustable for each channel
- Controlled In–Rush Current
- Pre–Charge FET
- Error Information
- LOD: LED Open Detection
- TEF: Thermal Error Flag
- APPLICATIONS
- Monocolor, Multicolor, Fullcolor LED Display
- Monocolor, Multicolor LED Signboard
- Display Backlighting
- Multicolor LED lighting applications
PowerPAD is a trademark of Texas Instruments.
- Features
- Error Flag, Fault Detection, LED Open Detection, ON/OFF LED Driver, Power Good
- Analog dimming steps
- 128
- Data transfer rate (Typ) (MHz)
- 30
- Ch to ch accuracy (Typ) (+/- %)
- 1
- Rating
- Catalog
- Operating temperature range (C)
- -40 to 85
TLC5924的完整型号有:TLC5924DAP、TLC5924DAPR、TLC5924RHBR、TLC5924RHBT,以下是这些产品的关键参数及官网采购报价:
TLC5924DAP,工作温度:-40 to 85,封装:HTSSOP (DAP)-32,包装数量MPQ:46个,MSL 等级/回流焊峰值温度:Level-3-260C-168 HR,引脚镀层/焊球材料:NIPDAU,TI官网TLC5924DAP的批量USD价格:1.573(1000+)
TLC5924DAPR,工作温度:-40 to 85,封装:HTSSOP (DAP)-32,包装数量MPQ:2000个,MSL 等级/回流焊峰值温度:Level-3-260C-168 HR,引脚镀层/焊球材料:NIPDAU,TI官网TLC5924DAPR的批量USD价格:1.321(1000+)
TLC5924RHBR,工作温度:-40 to 85,封装:VQFN (RHB)-32,包装数量MPQ:3000个,MSL 等级/回流焊峰值温度:Level-2-260C-1 YEAR,引脚镀层/焊球材料:NIPDAU,TI官网TLC5924RHBR的批量USD价格:1.371(1000+)
TLC5924RHBT,工作温度:-40 to 85,封装:VQFN (RHB)-32,包装数量MPQ:250个,MSL 等级/回流焊峰值温度:Level-2-260C-1 YEAR,引脚镀层/焊球材料:NIPDAU,TI官网TLC5924RHBT的批量USD价格:1.623(1000+)
TLC5924 IBIS Model Version 1.0
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)