The TLC5930 is a constant-current sink driver with an adjustable current value, and 1024 gray scale display that uses pulse width control. The output current is 0.2 mA to 40 mA with 12 bits of RGBx4. The maximum current value of the constant-current output can be set by one external resistor.

The TLC5930 includes three kinds of brightness adjustment functions: one adjusts the plane brightness between devices, changing the current values of all outputs uniformly. The second adjusts the frequency division to controls overall panel brightness, and the third adjusts the dot correction per LED, changing the current values of independent output.

The TLC5930 also includes color–tone correction function for correcting color per dot (pixel) and OVM function for constant-current output terminals used for LED failure detection.

Other features include the thermal error flag (TEF). The active wire-check (AWC) to check the communication between the controller and the device. The LED leakage-detect (LKD) to detect the reverse leakage on the LED. The GCLK error flag (GEF) and the HSYNC error flag (HEF) by monitoring the gray-scale clock count, and the dual source gray-scale clock (DSG) function to switch the gray-scale clock to the external input clock or to switch the internally-generated clock.

The TLC5930 requires three signals for standard operation: data input and gray-scale clock. Only three-signal line and 24-pin HTSSOP package reduce board area and total cost.

• 0.2-mA to 40-mA (Constant-Current Sink) Drive Capability x 12 Bits Output Count into 24-Pin HTSSOP Package
• 1024 Gray-Scale Display (PWM Control 1024 Steps) with Max 25-MHz Clock Frequency
• 3-Way Brightness Adjustment
  • Plane Brightness Adjustment for 64 Steps (40% to 100%)
  • Frequency Division for 16 Steps (6.3% to 100%)
  • Dot Correction for 256 Steps (0% to 100%)
• DS–Link Data Input/Output (Data Rate Max 20 bps) with Packet Operation
• 5 Error Information Types and 2 Gray–Scale Clock Modes
• 3.3-V VCC and LVTTL Interface
• APPLICATION
  • Full- or Multi-Color LED Display

• Features
• Error Flag, Fault Detection, Internal GS Clock, LED Open Detection, PWM LED Driver, Power Good
• Analog dimming steps
• 64
• Data transfer rate (Typ) (MHz)
• 20
• Ch to ch accuracy (Typ) (+/- %)
• 1
• Rating
• Catalog
• Operating temperature range (C)
• -20 to 85

TLC5930的完整型号有：TLC5930PWP，以下是这些产品的关键参数及官网采购报价：

TLC5930PWP，工作温度：-20 to 85，封装：HTSSOP (PWP)-24，包装数量MPQ：60个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TLC5930PWP的批量USD价格：2.42（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)