The TLC5960 is an eight-channel PWM LED driver with four intelligent headroom voltage monitor (iHVM) outputs. The LED drivers have scalable, high-voltage capability and provide 1% maximum current matching accuracy between LED strings. To achieve optimal efficiency, the iHVM automatically optimizes the external dc/dc converter output voltage to compensate for the forward-voltage variations of the LED.

Compared to a conventional HVM solution that requires several MOSFETs, capacitors, and resistors, the iHVM is designed to use only a single external resistor. The LED driver design is capable of up to 250kHz PWM dimming, and also provides an analog brightness dimming interface. This device easily adapts to various LED and power configurations with a single voltage input rail. Full protection and diagnostic functions are provided to protect the entire system, such as LED open/short detection (LOD/LSD), FET open/short detection (FOD/FSD) and thermal shutdown (TSD). In case of failure, the TLC5960 automatically disconnects the failed channel(s) from the operating channels and pulls down the open drain fault buffer (XFLT) to signal an error status.

• 250kHz PWM Dimming
• Four Intelligent Headroom Voltage Monitor (iHVM) Outputs
• Eight-Channel, High-Voltage LED Driver:
  • 0.3% (typ) Accuracy Between Channels
• Control Interface with Four PWM Inputs
• Easy-To-Use Analog Dimming Interface
• 10% to 100% Analog Brightness Dimming
• Integrated 5V Internal Regulator
• Integrated Power-On Reset (POR) Circuitry
• Full Protection/Diagnostic Functions:
  • LOD: LED Open Detection
  • LSD: LED Short Detection
  • FOD: FET Open Detection
  • FSD: FET Short Detection
• Built-In Phase Shift Function
• 38-Pin TSSOP Package
• APPLICATIONS
  • LED Backlights for LCD-TV
  • High-Current LED Lighting

iHVM is a trademark of Texas Instruments. All other trademarks are the property of their respective owners.

• Number of channels (#)
• 8
• Vin (Min) (V)
• 10
• Vin (Max) (V)
• 28
• Switching frequency (Max) (kHz)
• 250
• Features
• Analog Dimming
• Operating temperature range (C)
• -40 to 85

TLC5960的完整型号有：TLC5960DA、TLC5960DAR，以下是这些产品的关键参数及官网采购报价：

TLC5960DA，工作温度：-40 to 85，封装：TSSOP (DA)-38，包装数量MPQ：40个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TLC5960DA的批量USD价格：1.219（1000+）

TLC5960DAR，工作温度：-40 to 85，封装：TSSOP (DA)-38，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TLC5960DAR的批量USD价格：1.016（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)