The TLC77xx family of micropower supply voltage supervisors provide reset control, primarily in microcomputer and microprocessor systems.

During power-on, RESET is asserted when V_DD reaches 1 V. After minimum V_DD (≥ 2 V) is established, the circuit monitors SENSE voltage and keeps the reset outputs active as long as SENSE voltage (V_I(SENSE)) remains below the threshold voltage. An internal timer delays return of the output to the inactive state to ensure proper system reset. The delay time, t_d, is determined by an external capacitor:

t_d = 2.1 × 10⁴ × C_T

Where

C_T is in farads
t_d is in seconds

Except for the TLC7701, which can be customized with two external resistors, each supervisor has a fixed sense threshold voltage set by an internal voltage divider. When SENSE voltage drops below the threshold voltage, the outputs become active and stay in that state until SENSE voltage returns above threshold voltage and the delay time, t_d, has expired.

In addition to the power-on-reset and undervoltage-supervisor function, the TLC77xx adds power-down control support for static RAM. When CONTROL is tied to GND, RESET will act as active high. The voltage monitor contains additional logic intended for control of static memories with battery backup during power failure. By driving the chip select (CS) of the memory circuit with the RESET output of the TLC77xx and with the CONTROL driven by the memory bank select signal (CSH1) of the microprocessor, the memory circuit is automatically disabled during a power loss. (In this application the TLC77xx power has to be supplied by the battery.)

The TLC77xxI is characterized for operation over a temperature range of –40°C to 85°C; the TLC77xxQ is characterized for operation over a temperature range of –40°C to 125°C; and the TLC77xxM is characterized for operation over the full Military temperature range of –55°C to 125°C.

The 3×3 mm DRB package is also available as a non-magnetic package for medical imaging application.

• Power-On Reset Generator
• Automatic Reset Generation After Voltage Drop
• Precision Voltage Sensor
• Temperature-Compensated Voltage Reference
• Programmable Delay Time by External Capacitor
• Supply Voltage Range . . . 2 V to 6 V
• Defined RESET Output from VDD ≥ 1 V
• Power-Down Control Support for Static RAM With Battery Backup
• Maximum Supply Current of 16 μA
• Power Saving Totem-Pole Outputs
• Temperature Range . . . Up to –55°C to 125°C

• Number of supplies monitored
• 1
• Threshold voltage 1 (Typ) (V)
• 4.55
• Features
• Complimentary output
• Reset threshold accuracy (%)
• 1.8
• Output driver type/reset output
• Active-high, Active-low, Push-pull
• Time delay (ms)
• Programmable
• Rating
• Military
• Watchdog timer WDI (sec)
• None
• Operating temperature range (C)
• -55 to 125

TLC7705M的完整型号有：5962-9751301Q2A、5962-9751301QHA、5962-9751301QPA、TLC7705MFKB、TLC7705MJG、TLC7705MJGB、TLC7705MUB，以下是这些产品的关键参数及官网采购报价：

5962-9751301Q2A，工作温度：-55 to 125，封装：LCCC (FK)-20，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网5962-9751301Q2A的批量USD价格：29.956（1000+）

5962-9751301QHA，工作温度：-55 to 125，封装：CFP (U)-10，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网5962-9751301QHA的批量USD价格：33.284（1000+）

5962-9751301QPA，工作温度：-55 to 125，封装：CDIP (JG)-8，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网5962-9751301QPA的批量USD价格：23.299（1000+）

TLC7705MFKB，工作温度：-55 to 125，封装：LCCC (FK)-20，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网TLC7705MFKB的批量USD价格：29.956（1000+）

TLC7705MJG，工作温度：-55 to 125，封装：CDIP (JG)-8，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网TLC7705MJG的批量USD价格：16.642（1000+）

TLC7705MJGB，工作温度：-55 to 125，封装：CDIP (JG)-8，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网TLC7705MJGB的批量USD价格：23.299（1000+）

TLC7705MUB，工作温度：-55 to 125，封装：CFP (U)-10，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：SNPB，TI官网TLC7705MUB的批量USD价格：33.284（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)