The TLV320AIC34 device is a low-power four-channel audio codec with four-channel headphone amplifier, as well as multiple inputs and outputs programmable in single-ended or fully differential configurations. Extensive register-based power control is included, enabling four-channel 48-kHz DAC playback as low as 15 mW from a 3.3-V analog supply, making it ideal for portable battery-powered audio and telephony applications.

The record path of the TLV320AIC34 contains integrated microphone bias, digitally controlled four-channel microphone preamplifier, and automatic gain control (AGC), with mix or mux capability among the multiple analog inputs. Programmable filters are available during record which can remove audible noise that can occur during optical zooming in digital cameras. The playback path includes mix or mux capability from the four-channel DAC and selected inputs, through programmable volume controls, to the various outputs.

The TLV320AIC34 contains eight high-power output drivers as well as six line-level output drivers. The high-power output drivers are capable of driving a variety of load configurations, including up to eight channels of single-ended 16-Ω headphones using ac-coupling capacitors, or four channels in a capless output configuration. In addition, for codec A, pairs of drivers can be used to drive mono or stereo 8-Ω speakers directly in a BTL configuration at 500 mW per channel.

The four-channel audio DAC supports sampling rates from 8 kHz to 96 kHz and includes programmable digital filtering in each path for 3D, bass, treble, midrange effects, speaker equalization, and de-emphasis for 32-kHz, 44.1-kHz, and 48-kHz rates. The four-channel audio ADC supports sampling rates from 8 kHz to 96 kHz and is preceded by programmable gain amplifiers providing up to 59.5-dB analog gain for low-level microphone inputs. The TLV320AIC34 provides an extremely high range of programmability for both attack (8 to 1,408 ms) and for decay (0.05 to 22.4 seconds). This extended AGC range allows the AGC to be tuned for many types of applications.

For battery saving applications where neither analog nor digital signal processing is required, the device can be put in a special analog signal pass-through mode. This mode significantly reduces power consumption, as most of the device is powered down during this pass through operation.

The serial control bus supports normal-speed and fast I²C protocols, whereas the dual serial audio data busses are programmable for I²S, left- or right-justified, DSP, PCM, or TDM mode. Two highly programmable PLLs are included for flexible clock generation and support for all standard audio rates from a wide range of available MCLK_x frequencies, varying from 512 kHz to 50 MHz, with special attention paid to the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

The TLV320AIC34 operates from an analog supply of 2.7 V to 3.6 V, a digital core supply of 1.65 V to 1.95 V, and a digital I/O supply of 1.1 V to 3.6 V. The device is available in a 6-mm × 6-mm, 87-ball NFBGA package.

• Four-Channel Audio DAC
  • 102-dBA Signal-to-Noise Ratio
  • 16-, 20-, 24-, and 32-Bit Data
  • Supports Rates From 8 kHz to 96 kHz
  • 3D, Bass, Treble, EQ, and De-Emphasis Effects
  • Flexible Power Saving Modes and Performance Are Available
• Four-Channel Audio ADC
  • 92-dBA Signal-to-Noise Ratio
  • Supports Rates From 8 kHz to 96 kHz
  • Digital Signal Processing and Noise Filtering Available During Record
• Twelve Audio Inputs
  • Programmable in Single-Ended or Fully Differential Configurations
  • 3-State Capability for Floating Input Configurations
• Fourteen Audio Output Drivers
  • Stereo 8-Ω, 500-mW/Channel Speaker Drive Capability
  • Multiple Fully Differential or Single-Ended Headphone Drivers
  • Multiple Fully Differential or Single-Ended Line Outputs
  • Fully Differential Mono Outputs
• Low Power: 15-mW Stereo 48-kHz Playback With 3.3-V Analog Supply
• Ultra-Low-Power Mode With Passive Analog Bypass
• Programmable Input/Output Analog Gains
• Automatic Gain Control (AGC) for Record
• Programmable Microphone Bias Level
• Dual Programmable PLLs for Flexible Clock Generation
• I2C Control Bus
• Dual Audio Serial Data Busses
  • Support I2S, Left- or Right-Justified, DSP, PCM, and TDM Modes
  • Enable Asynchronous Simultaneous Operation of Busses and Data Converters
• Digital Microphone Input Support
• Concurrent Digital Microphone and Analog Microphone Support Available
• Extensive Modular Power Control
• Power Supplies:
  • Analog: 2.7 V to 3.6 V
  • Digital Core: 1.65 V to 1.95 V
  • Digital I/O: 1.1 V to 3.6 V
• Package: 6-mm × 6-mm 87-pin NFBGA

• Number of ADC channels
• 4
• Number of DAC channels (#)
• 4
• Digital audio interface
• L, R, I2S, DSP
• Analog inputs
• 12
• Sampling rate (Max) (kHz)
• 96
• Rating
• Catalog
• Features
• Matrix mixing, Phase-locked loop (PLL), Headset detect, Mono speaker amplifier, Stereo speaker amplifier, Stereo headphone amplifier
• ADC SNR (Typ) (dB)
• 92
• DAC SNR (Typ) (dB)
• 100

TLV320AIC34的完整型号有：TLV320AIC34IZAS、TLV320AIC34IZASR，以下是这些产品的关键参数及官网采购报价：

TLV320AIC34IZAS，工作温度：-40 to 85，封装：NFBGA (ZAS)-87，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SNAGCU，TI官网TLV320AIC34IZAS的批量USD价格：4.8（1000+）

TLV320AIC34IZASR，工作温度：-40 to 85，封装：NFBGA (ZAS)-87，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SNAGCU，TI官网TLV320AIC34IZASR的批量USD价格：4（1000+）

TLV320AIC34EVM-K — TLV320AIC34 评估模块 (EVM) 和 USB 主板

The TLV320AIC34 evaluation module (EVM)is in the modular EVM form factor, which allows direct evaluation of device performance and operating characteristics, and eases software development and system prototyping. This EVM is compatible with the 5-6Kinterfaceevaluation (...)

TLV320AIC3XSW-LINUX — 适用于 TLV320AIC3X 的 Linux 驱动程序

Linux 驱动程序支持用于 TLV320AIC3x 系列的低功耗立体声编解码器，通过 I2C 总线和接口与 Linux 便携式设备动态音频电源管理 (DAPM) 系统进行通信。
Linux 主线状态

Linux 主线中提供：是
可通过 git.ti.com 获取：不适用

Linux 源文件

与该器件关联的文件为：

sound/soc/codecs/tlv320aic3x.c

Documentation/devicetree/bindings/sound/tlv320aic3x.txt

sound/soc/codecs/tlv320aic3x.h

include/sound/tlv320aic3x.h

源文件 (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

COEFFICIENT-CALC — 数字双二阶滤波器系数计算器

COEFFICIENT-CALC (TIBQ) 可以计算 TI 音频编解码器中实施的数字滤波器双二阶传输函数的系数。通过选择滤波器类型并在显示传输函数增益和相位图的窗口中移动控制点，可以对数字滤波器的特性进行调节。