Get started today with the Thermistor Design Tool, offering complete resistance vs temperature table (R-T table) computation, other helpful methods to derive temperature and example C-code.

Linear thermistors offer linearity and consistent sensitivity across temperature to enable simple and accurate methods for temperature conversion. Low power consumption and a small thermal mass minimize the impact of self-heating. With built-in failsafe behavior at high temperatures and powerful immunity to environmental variation, these devices are designed for a long lifetime of high performance. The small size of the TMP6 series also allows for close placement to heat sources and quick response times.

Take advantage of benefits over NTC thermistors such as no extra linearization circuitry, minimized calibration, less resistance tolerance variation, larger sensitivity at high temperatures, and simplified conversion methods to save time and memory in the processor.

The TMP63-Q1 is currently available in a 0402 footprint-compatible X1SON package and a 0603 footprint-compatible SOT-5X3 package.

• AEC-Q100 qualified for automotive applications
• Temperature Options:
  • X1SON/DEC package grade 1: –40 °C ≤ TA ≤ 125 °C
  • SOT-5X3/DYA package grade 0: –40 °C ≤ TA ≤ 150 °C
• Silicon-based thermistor with a positive temperature coefficient (PTC)
• Linear resistance change across temperature
• 100-k? nominal resistance at 25 °C (R25)
  • ±1% maximum (0 °C to 70 °C)
• Consistent sensitivity across temperature
  • 6400 ppm/°C TCR (25 °C)
  • 0.2% typical TCR tolerance across temperature range
• Fast thermal response time of 0.6 s (DEC)
• Long lifetime and robust performance
  • Built-in fail-safe in case of short-circuit failures
  • 0.3% typical long term sensor drift

• Resistance (25°C) (Ω)
• 1
• Resistance tolerance (%)
• 1
• Operating temperature range (C)
• -40 to 125, -40 to 150
• Vin (Min) (V)
• 5.5
• Vin (Max) (V)
• 5.5
• Supply current (Max) (uA)
• 0
• Interface type
• Resistance
• Rating
• Automotive

TMP63-Q1的完整型号有：TMP6331QDECRQ1、TMP6331QDECTQ1、TMP6331QDYARQ1、TMP6331QDYATQ1，以下是这些产品的关键参数及官网采购报价：

TMP6331QDECRQ1，工作温度：-40 to 125，封装：X1SON (DEC)-2，包装数量MPQ：10000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TMP6331QDECRQ1的批量USD价格：.06（1000+）

TMP6331QDECTQ1，工作温度：-40 to 125，封装：X1SON (DEC)-2，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TMP6331QDECTQ1的批量USD价格：.26（1000+）

TMP6331QDYARQ1，工作温度：-40 to 150，封装：SOT-5X3 (DYA)-2，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网TMP6331QDYARQ1的批量USD价格：.076（1000+）

TMP6331QDYATQ1，工作温度：-40 to 150，封装：SOT-5X3 (DYA)-2，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网TMP6331QDYATQ1的批量USD价格：.276（1000+）

TMP6EVM — 线性硅 TMP6 热敏电阻评估模块

The TMP6EVM evaluation kit is a plug and play system to test and evaluate the linear silicon TMP6 thermistor. The EVM can be powered with either with USB or a CR2032 coin cell battery. The EVM is a standalone module that supports the TMP116 digital sensor and two analog channels. The TMP116 can be (...)

TMP6-THERMISTOR-DESIGN — 具有查找表、性能比较和代码示例的 TMP6 热敏电阻设计工具

与市面上其他传统的负温度系数 (NTC) 或正温度系数 (PTC) 热敏电阻一样，TMP6 线性热敏电阻在系统应用中需使用电阻-温度转换表。除实用工具外，TMP6 热敏电阻设计工具还提供了上述表格来帮助完成系统设计。此工具提供两种选项，即根据设计要求，将热敏电阻用于电阻分压器或恒流电路中。选好合适的工具后，可根据要使用的 TMP6 热敏电阻器件型号、偏置电压/电流、偏置电阻器（如需要）和 ADC 分辨率等对其进行配置。

选择满足系统要求的数值后，开发人员可使用其他选项卡对各种器件、ANSI C (...)