The TMS320DM357 (also referenced as DM357) leverages TI's DaVinci™ technology to meet the networked media encode and decode application processing needs of next-generation embedded devices.

The DM357 enables OEMs and ODMs to quickly bring to market devices featuring robust operating systems support, rich user interfaces, high processing performance, and long battery life through the maximum flexibility of a fully integrated mixed processor solution.

The ARM926EJ-S is a 32-bit RISC processor core that performs 32-bit or 16-bit instructions and processes 32-bit, 16-bit, or 8-bit data. The core uses pipelining so that all parts of the processor and memory system can operate continuously.

The ARM core incorporates:

• A coprocessor 15 (CP15) and protection module
• Data and program Memory Management Units (MMUs) with table look-aside buffers.
• Separate 16K-byte instruction and 8K-byte data caches. Both are four-way associative with virtual index virtual tag (VIVT).

The DM357 performance is enhanced by its H.264/MPEG4/JPEG coprocessor (HMJCP). The HMJCP performs the computational operations required for image processing; JPEG compression and MPEG4 video and imaging standard. The H.264/MPEG4/JPEG coprocessor supports MPEG4 Simple Profile (SP) , D1, VGA, SIF encode/decode resolutions and JPEG encode/decode.

The peripheral set includes: 2 configurable video ports (one input port and one output port); a 10/100 Mb/s Ethernet MAC (EMAC) with a Management Data Input/Output (MDIO) module; an inter-integrated circuit (I2C) Bus interface; one audio serial port (ASP); 2 64-bit general-purpose timers each configurable as 2 independent 32-bit timers; 1 64-bit watchdog timer; up to 71-pins of general-purpose input/output (GPIO) with programmable interrupt/event generation modes, multiplexed with other peripherals; 3 UARTs with hardware handshaking support on 1 UART; 3 pulse width modulator (PWM) peripherals; and 2 external memory interfaces: an asynchronous external memory interface (EMIFA) for slower memories/peripherals, and a higher speed synchronous memory interface for DDR2.

The DM357 device includes a Video Processing Subsystem (VPSS) with two configurable video/imaging peripherals: 1 Video Processing Front-End (VPFE) input used for video capture, and 1 Video Processing Back-End (VPBE) output for displaying video images.

The Video Processing Front-End (VPFE) is comprised of a CCD Controller (CCDC), a Preview Engine (Previewer), Histogram Module, Auto-Exposure/White Balance/Focus Module (H3A), and Resizer. The CCDC is capable of interfacing to common video decoders, CMOS sensors, and Charge Coupled Devices (CCDs). The Previewer is a real-time image processing engine that takes raw imager data from a CMOS sensor or CCD and converts from an RGB Bayer Pattern to YUV4:2:2. The Histogram and H3A modules provide statistical information on the raw color data for use by the DM357. The Resizer accepts image data for separate horizontal and vertical resizing from 1/4x to 4x in increments of 256/N, where N is between 64 and 1024.

The Video Processing Back-End (VPBE) is comprised of an On-Screen Display Engine (OSD) and a Video Encoder (VENC). The OSD engine is capable of handling 2 separate video windows and 2 separate OSD windows. Other configurations include 2 video windows, 1 OSD window, and 1 attribute window allowing up to 8 levels of alpha blending. The VENC provides three analog DACs that run at 54 MHz, providing a means for composite NTSC/PAL video, S-Video, and/or Component video output. The VENC also provides up to 24 bits of digital output to interface to RGB888 devices or hi-speed triple DACs such as the THS8200. The digital output is capable of 8/16-bit BT.656 output and/or CCIR.601 with separate horizontal and vertical syncs.

The Ethernet Media Access Controller (EMAC) provides an efficient interface between the DM357 and the network. The DM357 EMAC support both 10Base-T and 100Base-TX, or 10 Mbits/second (Mbps) and 100 Mbps in either half- or full-duplex mode, with hardware flow control and quality of service (QOS) support.

The Management Data Input/Output (MDIO) module continuously polls all 32 MDIO addresses in order to enumerate all PHY devices in the system. Once a Ethernet PHY candidate has been selected by the ARM, the MDIO module transparently monitors its link state by reading the PHY status register. Link change events are stored in the MDIO module and can optionally interrupt the ARM, allowing the ARM to poll the link status of the device without continuously performing costly MDIO accesses.

The HPI, I2C, SPI, and USB2.0 OTG ports allow DM357 to easily control peripheral devices and/or communicate with host processors. The DM357 also provides multimedia card support, MMC/SD, with SDIO support.

The rich peripheral set provides the ability to control external peripheral devices and communicate with external processors. For details on each of the peripherals, see the related sections later in this document and the associated peripheral reference guides.

The DM357 has a complete set of development tools for the ARM926EJS. These include C compilers and a Windows™ debugger interface for visibility into source code execution.

• Get started today with production-ready, easy-to-use audio and video codecs for digital media processors based on DaVinci? technology. Also available are various O/S Board Support Packages and software updates. All codecs are available for FREE evaluation. REQUEST FREE SOFTWARE!
• High-Performance Digital Media SoC
  • 270-MHz ARM926EJ-S? Core
  • Fully Software-Compatible With ARM9?
• ARM926EJ-S Core
  • Support for 32-Bit and 16-Bit (Thumb? Mode) Instruction Sets
  • ARM? Jazelle? Technology
  • EmbeddedICE-RT? Logic for Real-Time Debug
• ARM9 Memory Architecture
  • 16K-Byte Instruction Cache
  • 8K-Byte Data Cache
  • 16K-Byte RAM
  • 8K-Byte ROM
• H.264/MPEG4/JPEG Coprocessor
  • Fixed Function Coprocessor Supports:
    • H.264 BP Codec at D1, VGA, SIF
    • MPEG4 SP Codec at D1, VGA, SIF
    • JPEG Codec
• Embedded Trace Buffer? (ETB11?) With 4KB Memory for ARM9 Debug
• Endianness: Little Endian
• Video Processing Subsystem
  • Front End Provides:
    • CCD and CMOS Imager Interface
    • BT.601/BT.656 Digital YCbCr 4:2:2 (8-/16-Bit) Interface
    • Preview Engine for Real-Time Image Processing
    • Glueless Interface to Common Video Decoders
    • Histogram Module
    • Auto-Exposure, Auto-White Balance and Auto-Focus Module
    • Resize Engine
      • Resize Images From 1/4x to 4x
      • Separate Horizontal/Vertical Control
  • Back End Provides:
    • Hardware On-Screen Display (OSD)
    • 3 - 54-MHz DACs for a Combination of:
      • Composite NTSC/PAL Video
      • Luma/Chroma Separate Video (S-video)
      • Component (YPbPr or RGB) Video (Progressive/Interlaced)
      • Digital Output
      • 8-/16-bit YUV or up to 24-Bit RGB
      • Up to 2 Video Windows
• External Memory Interfaces (EMIFs)
  • 32-Bit DDR2 SDRAM Memory Controller With 256M-Byte Address Space (1.8-V I/O)
  • Asynchronous 16-Bit Wide EMIF (EMIFA) With 128M-Byte Address Reach
    • Flash Memory Interfaces
      • NOR (8-/16-Bit-Wide Data)
      • NAND (8-/16-Bit-Wide Data)
• Flash Card Interfaces
  • Multimedia Card (MMC)/Secure Digital (SD) with Secure Data I/O (SDIO)
  • SmartMedia
• Enhanced Direct-Memory-Access (EDMA) Controller (64 Independent Channels)
• Two 64-Bit General-Purpose Timers (Each Configurable as Two 32-Bit Timers)
• One 64-Bit Watch Dog Timer
• Three UARTs (One with RTS and CTS Flow Control)
• One Serial Peripheral Interface (SPI) With Two Chip-Selects
• Master/Slave Inter-Integrated Circuit I2C Bus?)
• Audio Serial Port (ASP)
  • I2S
  • AC97 Audio Codec Interface
  • Standard Voice Codec Interface (AIC12)
• 10/100 Mb/s Ethernet Media Access Controller (EMAC)
  • IEEE 802.3 Compliant
  • Media Independent Interface (MII)
• Host Port Interface (HPI) with 16-Bit Multiplexed Address/Data
• USB2.0 OTG Controller With Integrated High-Speed 2.0 PHY
• Three Pulse Width Modulator (PWM) Outputs
• On-Chip ARM ROM Bootloader (RBL) to Boot From NAND Flash or UART
• Comprehensive Power-Saving Modes
• Flexible PLL Clock Generators
• IEEE-1149.1 (JTAG) Boundary-Scan-Compatible
• Up to 71 General-Purpose I/O (GPIO) Pins (Multiplexed With Other Device Functions)
• 361-Pin Pb-Free BGA Package (ZWT Suffix), 0.8-mm Ball Pitch
• 0.09-μm/6-Level Cu Metal Process (CMOS)
• 3.3-V and 1.8-V I/O, 1.2-V Core
• Applications:
  • Digital Media
  • Networked Media Encode/Decode
  • Video Imaging

All trademarks are the property of their respective owners.

• Ethernet MAC
• 10/100
• Rating
• Catalog

TMS320DM357的完整型号有：TMS320DM357ZWT，以下是这些产品的关键参数及官网采购报价：

TMS320DM357ZWT，工作温度：PropertyValue，封装：NFBGA (ZWT)-361，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：Call TI，TI官网TMS320DM357ZWT的批量USD价格：17.247（1000+）

LINUXDVSDK-DV — Linux 数字视频软件开发套件 (DVSDK) v2x/v3x - 达芬奇数字媒体处理器

2010 年 10 月生效 - Linux DVSDK v4 已发布。对于上面未列出的 DaVinci 器件，请在 TI.com 上搜索您的器件型号；此产品页面将提供指向您当前 DVSDK 的链接。

借助 Linux 数字视频软件开发套件 (DVSDK)，DaVinci 系统集成人员能快速开发可在 DaVinci 系列不同器件间轻松移植的 Linux 多媒体应用。每个 DVSDK 都包含一套预先测试的操作系统、应用框架和具有示例程序的编解码器库，这些示例程序演示了从外设流入和流出音频和视频数据的实时解码和编码过程。对于配备 DSP 内核的 DaVinci 器件，DVSDK (...)

TMDMFP — 多媒体框架产品 (MFP) - 编解码器引擎，框架组件和 xDAIS

Multimedia Framework Products (MFP)

A major advantage of programmable DSPs over fixed-function devices is their ability to accelerate multiple multimedia functions in a single device. TI multimedia framework products are designed to enable users to easily share a DSP between algorithms by handling (...)

DM357 ZWT BSDL Model

TI has partnered with companies to offer a wide range of software, tools, and SOMs using TI processors to accelerate your path to production. Download this search tool to quickly browse our third-party solutions and find the right third-party to meet your needs. The software, tools and modules (...)