The TPA2008D2 is a third generation 5-V class-D amplifier from Texas Instruments. Improvements to previous generation devices include: dc volume control, lower supply current, lower noise floor, higher efficiency, smaller packaging, and fewer external components. Most notably, a new filter-free class-D modulation technique allows the TPA2008D2 to directly drive the speakers, without needing a low-pass output filter consisting of two inductors and three capacitors per channel. Eliminating this output filter saves approximately 30% in system cost and 75% in PCB area.

The improvements and functionality make this device ideal for LCD projectors, LCD monitors, powered speakers, and other applications that demand more battery life, reduced board space, and functionality that surpasses currently available class-D devices.

A chip-level shutdown control limits total supply current to 1 µA, making the device ideal for battery-powered applications. Protection circuitry increases device reliability: thermal and short circuit. Undervoltage shutdown saves battery power for more essential devices when battery voltage drops to low levels.

The TPA2008D2 is available in a 24-pin TSSOP PowerPAD™ package.

• 3 W Per Channel into 3- Speakers (THD+N = 10%)
  • < 0.045% THD at 1.5 W, 1 kHz, 3- Load
• DC Volume Control With 2-dB Steps From –38 dB to 20 dB
• Filter Free Modulation Scheme Operates Without a Large and Expensive LC Output Filter
• Extremely Efficient Third Generation 5-V Class-D Technology
  • Low Supply Current, 7 mA
  • Low Shutdown Control, 1 μA
  • Low Noise Floor, –80 dBV
  • Maximum Efficiency into 3 , 78%
  • Maximum Efficiency into 8 , 88%
  • PSRR, –70 dB
• Integrated Depop Circuitry
• Operating Temperature Range, –40°C to 85°C
• Space-Saving, Surface Mount PowerPAD? Package
• APPLICATIONS
  • LCD Projectors
  • LCD Monitors
  • Powered Speakers
  • Battery Operated and Space Constrained Systems

PowerPAD is a trademark of Texas Instruments.

• Audio input type
• Analog Input
• Architecture
• Class-D
• Speaker channels (Max)
• Stereo
• Power stage supply (Max) (V)
• 5.5
• Power stage supply (Min) (V)
• 4.5
• Load (Min) (ohms)
• 3
• Output power (W)
• 3
• SNR (dB)
• 96
• THD + N @ 1 kHz (%)
• 0.3
• Iq (Typ) (mA)
• 7
• Control interface
• Hardware
• Closed/open loop
• Closed
• Analog supply (Min) (V)
• 2.5
• Analog supply (Max) (V)
• 5.5
• PSRR (dB)
• 70
• Operating temperature range (C)
• -40 to 85

TPA2008D2的完整型号有：TPA2008D2PWP、TPA2008D2PWPR，以下是这些产品的关键参数及官网采购报价：

TPA2008D2PWP，工作温度：-40 to 85，封装：HTSSOP (PWP)-24，包装数量MPQ：60个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPA2008D2PWP的批量USD价格：0.895（1000+）

TPA2008D2PWPR，工作温度：-40 to 85，封装：HTSSOP (PWP)-24，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPA2008D2PWPR的批量USD价格：0.746（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)