The TPA2032D1 (2V/V gain), TPA2033D1 (3V/V gain), and TPA2034D1 (4V/V gain) are 2.75–W high efficiency filter–free class–D audio power amplifiers, each in an approximately 1.5–mm × 1.5–mm wafer chip scale package (WCSP) that requires only one external component. The pinout is the same as the TPA2010D1 except that the external gain setting input resistors required by the TPA2010D1 are integrated into the fixed gain TPA203xD1 family.

Features like –75dB PSRR and improved RF–rectification immunity with a very small PCB footprint (WCSP amplifier plus single decoupling cap) make the TPA203xD1 family ideal for wireless handsets. A fast start–up time of 3.2 ms with minimal pop makes the TPA203xD1 family ideal for PDA applications.

In wireless handsets, the earpiece, speaker phone, and melody ringer can each be driven by a TPA203xD1. The TPA203xD1 family has a low 27–µV noise floor, A–weighted.

• Maximize Battery Life and Minimize Heat
  • 0.5–μ Shutdown Current
  • 3.0–mA Quiescent Current
  • High Efficiency Class–D
    • 88% at 400mW at 8
    • 80% at 100mW at 8
• Three Fixed Gain Versions
  • TPA2032D1 has a gain of 2 V/V (6dB)
  • TPA2033D1 has a gain of 3 V/V (9.5dB)
  • TPA2034D1 has a gain of 4 V/V (12dB)
• Only One External Component Required
  • Internal Matched Input Gain and Feedback Resistors for Excellent PSRR and CMRR
  • Optimized PWM Output Stage Eliminates LC Output Filter
  • PSRR (–75 dB) and Wide Supply Voltage (2.5 V to 5.5 V) Eliminates Need for a Dedicated Voltage Regulator
  • Fully Differential Design Reduces RF Rectification and Eliminates Bypass Capacitor
  • CMRR (–69 dB)Eliminates Two Input Coupling Capacitors
• Thermal and Short–Circuit Protection
• Pinout Very Similar to TPA2010D1
• Wafer Chip Scale Packaging (WCSP)
  • NanoFree Lead–Free (Pb–Free: YZF)
• APPLICATIONS
  • Ideal for Wireless Handsets, PDAs, and other mobile devices

• Audio input type
• Analog Input
• Architecture
• Class-D
• Speaker channels (Max)
• Mono
• Power stage supply (Max) (V)
• 5.5
• Power stage supply (Min) (V)
• 2.5
• Load (Min) (ohms)
• 4
• Output power (W)
• 2.75
• SNR (dB)
• 100
• THD + N @ 1 kHz (%)
• 0.18
• Iq (Typ) (mA)
• 4
• Control interface
• GPIO
• Closed/open loop
• Closed
• Analog supply (Min) (V)
• 2.5
• Analog supply (Max) (V)
• 5.5
• PSRR (dB)
• 75
• Operating temperature range (C)
• -40 to 85

TPA2032D1的完整型号有：TPA2032D1YZFR、TPA2032D1YZFT，以下是这些产品的关键参数及官网采购报价：

TPA2032D1YZFR，工作温度：-40 to 85，封装：DSBGA (YZF)-9，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPA2032D1YZFR的批量USD价格：.415（1000+）

TPA2032D1YZFT，工作温度：-40 to 85，封装：DSBGA (YZF)-9，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPA2032D1YZFT的批量USD价格：.498（1000+）

TPA203XD1EVM — TPA203XD1EVM Evaluation Module

The TPA203XD1EVM is a Pb-free, highly-efficient, Filter-Freemono audio power amplifier evaluation module. It consists of the TPA2032D1, a 2.75W low-voltage stereo Class-D audio power amplifier IC in a very small NanoFree™ wafer chip scale package (WCSP), and all necessary passive (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)