The TPA2051D3 is an audio subsystem with a mono Class-D power amplifier, a stereo DirectPath headphone amplifier, and bypass switches. The DirectPath headphone amplifier eliminates the need for external dc-blocking output capacitors. The built-in charge pump creates a negative supply voltage for the headphone amplifier, allowing a 0 V dc bias at the output. The DirectPath headphone amplifier drives 25 mW into 16 speakers from a 4.2 V supply.

The subsystem includes three inputs: A differential mono input and two stereo single-ended (SE) inputs. The stereo inputs are also configurable as differential mono inputs. Each input channel has an independent volume control. Seven operating modes provide input-to-output combinations and shutdown control. Operating mode and volume levels are controlled over a 1.8 V compatible I²C interface.

The TPA2051D3 uses SpeakerGuard^TM technology to prevent output clipping distortion and excessive power to the speaker and headphones.

The Class-D amplifier includes a bypass mode. This allows the baseband IC (BB) to directly drive the 8 speaker. This is useful for dual-mode speaker phones in voice—only mode.

The Class-D amplifier uses 4.9 mA and the DirectPath amplifier uses 4.1 mA of typical quiescent current. Total supply current reduces to less than 1 µA in shutdown.

The TPA2051D3 is available in a 25-bump 2,16 mm × 2,11 mm, 0,4 mm pitch WCSP with less than 0.8 mm height.

• Mono Class-D Amp: 730 mW into 8 from 3.6 V Supply (1% THD)
• Class-D Bypass Switches
• DirectPath Stereo Headphone Amplifier
  • No Output Capacitors Required
• SpeakerGuard Automatic Gain Control (AGC)
• One Differential Mono and Two Stereo Single-Ended Inputs
• 3:1 Input MUX with Mode Control
• 32-Step Volume Control for Both Input Channels
• Independent Volume Controls for All Inputs
• Independent Shutdown for Headphone and Class-D Amplifiers
• I2C Interface
• Short-Circuit and Thermal-Overload Protection
• Operates from 2.5 V to 5.5 V
• 25-Ball 2,16 mm × 2,11 mm, 0,4 mm pitch WCSP
• APPLICATIONS
  • Smart Phones / Cellular Phones
  • Portable Media Players
  • Portable Gaming
  • Multimedia Platforms

• Audio input type
• Analog Input
• Architecture
• Class-D
• Speaker channels (Max)
• Mono
• Power stage supply (Max) (V)
• 5.5
• Power stage supply (Min) (V)
• 2.5
• Load (Min) (ohms)
• 8
• Output power (W)
• 2.9
• SNR (dB)
• 97
• THD + N @ 1 kHz (%)
• 0.04
• Iq (Typ) (mA)
• 6.3
• Control interface
• I2C
• Closed/open loop
• Open
• Analog supply (Min) (V)
• 2.5
• Analog supply (Max) (V)
• 5.5
• PSRR (dB)
• 75
• Operating temperature range (C)
• -40 to 85

TPA2051D3的完整型号有：TPA2051D3YFFR、TPA2051D3YFFT，以下是这些产品的关键参数及官网采购报价：

TPA2051D3YFFR，工作温度：-40 to 85，封装：DSBGA (YFF)-25，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPA2051D3YFFR的批量USD价格：1.272（1000+）

TPA2051D3YFFT，工作温度：-40 to 85，封装：DSBGA (YFF)-25，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPA2051D3YFFT的批量USD价格：1.454（1000+）

TPA2051D3 PSpice Transient Model (Rev. A)

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)