The TPA6203A1 is a 1.25-W mono fully differential amplifierdesigned to drive a speaker with at least 8-Ω impedance while consuming less than 37 mm² (ZQV package option) total printed-circuit board (PCB) area in most applications. This device operates from 2.5 V to 5.5 V, drawing only 1.7 mA of quiescent supply current. The TPA6203A1 is available in the space-saving 2 mm x 2 mm MicroStar Junior BGA package, and the space saving 3 mm x 3 mm QFN (DRB) package.

Features like 85-dB PSRR from 90 Hz to 5 kHz, improved RF-rectification immunity, and small PCB area makes the TPA6203A1 ideal for wireless handsets. A fast start-up time of 4 µs with minimal pop makes the TPA6203A1 ideal for PDA applications.

• 1.25 W Into 8 Ω From a 5-V Supply at THD = 1% (Typical)
• Low Supply Current: 1.7 mA Typical
• Shutdown Control < 10 μA
• Only Five External Components
  • Improved PSRR (90 dB) and Wide Supply Voltage (2.5 V to 5.5 V) for Direct Battery Operation
  • Fully Differential Design Reduces RF Rectification
  • Improved CMRR Eliminates Two Input Coupling Capacitors
  • C(BYPASS) Is Optional Due to Fully Differential Design and High PSRR
• Avaliable in a 2 mm x 2 mm MicroStar Junior BGA Package (GQV, ZQV)
• Available in 3 mm x 3 mm QFN Package (DRB)
• Available in an 8-Pin PowerPAD MSOP (DGN)
• APPLICATIONS
  • Designed for Wireless or Cellular Handsets and PDAs

• Audio input type
• Analog Input
• Architecture
• Class-AB
• Speaker channels (Max)
• Mono
• Power stage supply (Max) (V)
• 5.5
• Power stage supply (Min) (V)
• 2.5
• Load (Min) (ohms)
• 8
• Output power (W)
• 1.25
• SNR (dB)
• 104
• THD + N @ 1 kHz (%)
• 0.06
• Iq (Typ) (mA)
• 1.7
• Control interface
• Hardware
• Closed/open loop
• Closed
• Analog supply (Min) (V)
• 2.5
• Analog supply (Max) (V)
• 5.5
• PSRR (dB)
• 90
• Operating temperature range (C)
• -40 to 85

TPA6203A1的完整型号有：TPA6203A1DGN、TPA6203A1DGNR、TPA6203A1DRB、TPA6203A1DRBR、TPA6203A1NMBR，以下是这些产品的关键参数及官网采购报价：

TPA6203A1DGN，工作温度：-40 to 85，封装：HVSSOP (DGN)-8，包装数量MPQ：80个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAUAG，TI官网TPA6203A1DGN的批量USD价格：.374（1000+）

TPA6203A1DGNR，工作温度：-40 to 85，封装：HVSSOP (DGN)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPA6203A1DGNR的批量USD价格：.312（1000+）

TPA6203A1DRB，工作温度：-40 to 85，封装：SON (DRB)-8，包装数量MPQ：121个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPA6203A1DRB的批量USD价格：.374（1000+）

TPA6203A1DRBR，工作温度：-40 to 85，封装：SON (DRB)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPA6203A1DRBR的批量USD价格：.312（1000+）

TPA6203A1NMBR，工作温度：-40 to 85，封装：NFBGA (NMB)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：SNAGCU，TI官网TPA6203A1NMBR的批量USD价格：.312（1000+）

TPA6203A1EVM — TPA6203A1 评估模块 (EVM)

The TPA6203A1 is a 1.25-W mono fully differentialamplifier designed to drive a speaker with at least 8-Ohm impedance while consuming less than 37 mm2 total printed-circuit board (PCB) area in most applications.

This device operates from 2.5 V to 5.5 V, drawing only 1.7 mA of quiescent supply (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)