The TPD4S009 and TPD4S010 are four-channel TVS diode arrays for electrostatic discharge (ESD) protection. TPD4S009 and TPD4S010 are rated to dissipate contact ESD strikes at the maximum level specified in the IEC 61000-4-2 international standard (Level 4), with ±8-kV contact discharge ESD protection. The low capacitance (0.8-pF) of these devices, coupled with the excellent matching between differential signal pairs (0.05-pF line-line capacitance for the TPD4S009DRY) enables this device to provide transient voltage suppression circuit protection for high-speed differential data rates (3-dB bandwidth > 4 GHz).

The TPD4S009 is offered in DBV, DCK, DGS, and DRY packages. The TPD4S009DRYR is the most space saving package option available for dual pair high-speed differential lines. The TPD4S010 is offered in the industry standard DQA package. The TPD4S009DGSR and TPD4S010DQAR offer flow-through board layout options to reduce signal glitches normally caused by routing mismatches between the D+ and D– signal pair. See also TPD4E05U06DQAR which is P2P compatible with TPD4S010DQAR. This device offers higher IEC ESD protection, lower capacitance, lower R_DYN, lower DC breakdown voltage, and lower clamping voltage.

• IEC 61000-4-2 Level 4 ESD Protection
  • ±8-kV Contact Discharge
• IEC 61000-4-5 Surge Protection
  • 2.5A (8/20μs)
• I/O Capacitance: 0.8 pF (Typical)
• Low Leakage Current: 10 nA (Typical)
• Supports High-Speed Differential Data Rates (3-dB Bandwidth > 4 GHz)
• Ultra-low Matching Capacitance Between Differential Signal Pairs
• Ioff Feature for the TPD4S009
• Industrial Temperature Range: –40°C to 85°C
• Easy Straight through Routing, Space-Saving Package Options

• Number of channels (#)
• 4
• IO capacitance (Typ) (pF)
• 0.8
• Vrwm (V)
• 5.5
• IEC 61000-4-2 contact (+/- kV)
• 8
• IEC 61000-4-5 (A)
• 2.5
• Features
• —
• Bi-/uni-directional
• Uni-Directional
• Dynamic resistance (Typ) (?)
• 1.1
• Clamping voltage (V)
• 20
• IO leakage current (Max) (nA)
• 100
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 85

TPD4S010的完整型号有：TPD4S010DQAR，以下是这些产品的关键参数及官网采购报价：

TPD4S010DQAR，工作温度：-40 to 85，封装：USON (DQA)-10，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPD4S010DQAR的批量USD价格：0.197（1000+）

DRV8353RH-EVM — DRV8353RH evaluation module, three-phase brushless DC smart gate driver

DRV8353RH-EVM 是基于 DRV8353RH 栅极驱动器和 CSD19532Q5B NexFET™ MOSFET 的 15A 三相无刷直流驱动级。

该模块具有单独的直流总线和相电压感应以及单独的低侧电流分流放大器，因此该评估模块非常适合无传感器 BLDC 算法。该模块通过集成式 0.35A 降压转换器为 MCU 提供 3.3V 电源。该驱动级具有 IDRIVE 配置和故障引脚，并通过具有特定电阻值的易于配置的硬件接口提供短路、过热、击穿和欠压保护。

DRV8353RS-EVM — DRV8353RS evaluation module,three-phase brushless DC smart gate driver

The DRV8353RS-EVM is a 15A, 3-phase brushless DC drive stage based on the DRV8353RS gate driver and CSD19532Q5B NexFET™ MOSFETs.

The module has individual DC bus and phase voltage sense as well as individual low-side current shunt amplifiers, making this evaluation module ideal for sensorless BLDC (...)

ESDEVM — 通用 ESD 评估模块

Texas Instrument's ESDEVM evaluation module allows the evaluation of most of TI's ESD portfolio. The board comes with all traditional ESD footprints in order to be able to test any number of devices. Devices that need to be tested can be soldered onto their respect footprint and then tested. For (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)