The TPIC6B595 device is a monolithic, high-voltage, medium-current power 8-bit shift register designed for use in systems that require relatively high load power. The device contains a built-in voltage clamp on the outputs for inductive transient protection. Power driver applications include relays, solenoids, and other medium current or high-voltage loads.

This device contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. Data transfers through the shift and storage registers on the rising edge of the shift-register clock (SRCK) and the register clock (RCK), respectively.

The storage register transfers data to the output buffer when shift-register clear (SRCLR) is high. When SRCLR is low, the input shift register is cleared. When output enable (G) is held high, all data in the output buffers is held low and all drain outputs are off. When G is held low, data from the storage register is transparent to the output buffers. When data in the output buffers is low, the DMOS-transistor outputs are off. When data is high, the DMOS transistor outputs have sink-current capability. The serial output (SER OUT) allows for cascading of the data from the shift register to additional devices.

Outputs are low-side, open-drain DMOS transistors with output ratings of 50 V and 150-mA continuous sink-current capability. Each output provides a 500-mA typical current limit at T_C = 25°C. The current limit decreases as the junction temperature increases for additional device protection.

The TPIC6B595 is characterized for operation over the operating case temperature range of −40°C to 125°C.

For all available packages, see the orderable addendum at the end of the data sheet.

• Low rDS(on),5 Ω (Typical)
• Avalanche Energy, 30 mJ
• Eight Power DMOS Transistor Outputs of 150-mA Continuous Current
• Output Clamp Voltage, 50 V
• Devices are Cascadable
• Low-Power Consumption

• Number of channels (#)
• 8
• Topology
• Open drain
• Rating
• Automotive
• Operating temperature range (C)
• -40 to 125
• Vin (Min) (V)
• 4.5
• Vin (Max) (V)
• 5.5
• Vout (Max) (V)
• 50
• Features
• Thermal Shutdown

TPIC6B595的完整型号有：TPIC6B595DW、TPIC6B595DWG4、TPIC6B595DWR、TPIC6B595DWRG4、TPIC6B595N，以下是这些产品的关键参数及官网采购报价：

TPIC6B595DW，工作温度：-40 to 125，封装：SOIC (DW)-20，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPIC6B595DW的批量USD价格：.528（1000+）

TPIC6B595DWG4，工作温度：PropertyValue，封装：SOIC (DW)-20，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPIC6B595DWG4的批量USD价格：.594（1000+）

TPIC6B595DWR，工作温度：-40 to 125，封装：SOIC (DW)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPIC6B595DWR的批量USD价格：.451（1000+）

TPIC6B595DWRG4，工作温度：PropertyValue，封装：SOIC (DW)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPIC6B595DWRG4的批量USD价格：.506（1000+）

TPIC6B595N，工作温度：-40 to 125，封装：PDIP (N)-20，包装数量MPQ：20个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：NIPDAU，TI官网TPIC6B595N的批量USD价格：.594（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)