The TPS22946 is an ultralow power load switch that provides protection to systems and loads in high-current conditions. The device contains a 300-mΩ current-limited P-channel MOSFET that can operate over an input voltage range of 1.62 V to 5.5 V. The switch is controlled by an on/off input (ON), which can interface directly with low-voltage control signals. The TPS22946 includes thermal shutdown protection that prevents damage to the device when a continuous over-current condition causes excessive heating by turning off the switch.

When the switch current reaches the maximum limit, the TPS22946 operates in a constant-current mode to prohibit excessive currents from causing damage. The current limit can be selected using the CL input: a high CL input sets the current limit to 155 mA, a low CL input sets the current limit to 70 mA, and a floating CL input sets the current limit to 30 mA.

If the constant current condition persists after 10 ms, the switch is turned off and the fault signal pin (OC) is pulled low. The TPS22946 has an auto-restart feature which turns the switch on again after 70 ms if the ON pin is still active. If the TPS22946 remains in an over-current condition for 5 seconds, the device shuts off until it is turned on again by setting the ON control signal off and then on.

If the device is used to protect an LDO, the inrush current required by the LDO at startup can, in some cases, exceed the current limit and initiate a blanking (current limiting) condition. The TPS22946 provides allowance for this scenario during startup of the LDO by temporarily increasing the current limit to 435 mA for 8 ms after the load switch is enabled.

The TPS22946 is available in space-saving 6-pin DSBGA (YZP) package. The device is characterized for operation over the free-air temperature range of –40°C to 85°C.

• Ultralow Quiescent Current 1 μA (Typical) at VIN = 1.8 V
• Input Voltage Range: 1.62 V to 5.5 V
• Low ON-Resistance
  • rON = 300 mΩ at VIN = 5.5 V
  • rON = 400 mΩ at VIN = 3.3 V
  • rON = 500 mΩ at VIN = 2.5 V
  • rON = 600 mΩ at VIN = 1.8 V
• Selectable Minimum Current Limit: 155 mA, 70 mA, or 30 mA
• Integrated Inrush Current Time-out (8 ms)
• Shutdown Current: < 1 μA
• Thermal Shutdown
• Fault Blanking
• Auto Restart
• Overcurrent Condition Time-out (Automatic Disable for Permanent Overcurrent)
• 1.8-V Compatible Control Input
• ESD Performance Tested Per JESD 22
  • 6000-V Human-Body Model (A114-B, Class II)
• Tiny DSGBA Package 1.4 mm × 0.9 mm (YZP)

• Number of channels (#)
• 1
• Vin (Min) (V)
• 1.62
• Vin (Max) (V)
• 5.5
• Imax (A)
• 0.235
• Ron (Typ) (mOhm)
• 400
• Shutdown current (ISD) (Typ) (uA)
• 0.1
• Quiescent current (Iq) (Typ) (uA)
• 1.3
• Soft start
• Fixed Rise Time
• Rise time (Typ) (us)
• 35
• Current limit type
• Adjustable
• Features
• Thermal shutdown
• Operating temperature range (C)
• -40 to 85

TPS22946的完整型号有：TPS22946YZPR，以下是这些产品的关键参数及官网采购报价：

TPS22946YZPR，工作温度：-40 to 85，封装：DSBGA (YZP)-6，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS22946YZPR的批量USD价格：.354（1000+）

TPS22946EVM-499 — TPS22946 限流负载开关评估模块

借助 TPS22946EVM-499 评估模块 (EVM)，用户能够将电源连接到采用超小型 CSP-6 封装的 TPS22946 负载开关并对其进行控制。可轻松地对导通电阻、压摆率和限流属性等参数进行评估。

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TIDA-010019 — 针对温度传感器中冷端补偿参考设计的 RTD 替代

使用热电偶 (TC) 的温度检测应用需要高精度本地温度传感器来实现高精度。在此参考设计中，突出显示并说明了针对诸如冷端补偿 (CJC) 或包含超低功耗 TC 模拟前端等设计难题的解决方案。对高精度 4mA 至 20mA 传感器的功耗性能和精度性能进行了优化，同时还展示了不同 CJC 和 TC 前端实现的性能。

TIDA-010008 — 用于针对电网应用提供瞬态保护且基于平缓钳位 TVS 的参考设计

该参考设计采用多种方法，使用平缓钳位浪涌保护措施、ESD 器件、电子保险丝或负载开关，来保护交流或直流模拟输入、直流模拟输出、交流或直流二进制输入、带高侧或低侧驱动器的数字输出、LCD 偏置电源、USB 接口（电源和数据）和具有 24、12 或 5V 输入的板载电源（用于多个电网应用），使其免受过压、过载和瞬变（1.2/50us，42Ω）的影响。该设计监测温度、湿度、磁场和电源以进行诊断。