The TPS22949 and TPS22949A are devices that provide protection to systems and loads in high-current conditions. The device contains a 500-mΩ current-limited P-channel MOSFET that can operate over an input voltage range of 1.62 V to 4.5 V as well as a low-dropout (LDO) regulator with a fixed output voltage of 1.8 V.

The switch is controlled by an on/off input (EN1), which can interface directly with low-voltage control signals. When the switch current reaches the maximum limit, the TPS22949/TPS22949A operates in a constant-current mode to prohibit excessive currents from causing damage. If the constant current condition persists after 12 ms, these devices shut off the switch and pull the fault signal pin (OC) low. The TPS22949/TPS22949A has an auto-restart feature that turns the switch on again after 70 ms if the EN1 pin is still active.

The output of the current limiter is internally connected to an RF low-dropout (LDO) regulator that offers good AC performance with very low ground current, good power supply rejection ratio (PSRR), low noise, fast start-up, and excellent line and load transient response. The output of the regulator is stable with ceramic capacitors. This LDO uses a precision voltage reference and feedback loop to achieve overall accuracy of 2% over all load, line, process, and temperature variations.

The TPS22949A integrates additional internal circuitry that increases the current limit of the switch during the power-up sequence. This feature allows the TPS22949A to operate without a storage capacitor at the input of the LDO.

The TPS22949 and TPS22949A are available in a space-saving 8-terminal WCSP (YZP) or in an 8-pin WSON package (DRG). Both devices are characterized for operation over the free-air temperature range of –40°C to 85°C.

• Integrated Current Limiter
  • Input Voltage Range: 1.62 V to 4.5 V
  • Low ON-Resistance
    • rON = 300-mΩ at VIN = 4.5 V
    • rON = 350-mΩ at VIN = 3.3 V
    • rON = 400-mΩ at VIN = 2.5 V
    • rON = 600-mΩ at VIN = 1.8 V
  • Integrated 100-mA Minimum Current Limit
  • Undervoltage Lockout
  • Fast-Current Limit Response Time
  • Integrated Fault Blanking and Auto Restart
• Stable Without Current Limiter Output Capacitor (TPS22949A Only)
• Integrated Low-Noise RF LDO
  • Input Voltage Range: 1.62 V to 4.5 V
  • Low Noise: 50 μVrms (10 Hz to 100 kHz)
  • 80-dB VIN PSRR (10 Hz to 10 kHz)
  • Fast Start-Up Time: 130 μs
  • Low Dropout 100 mV at Iload =100 mA
  • Integrated Output Discharge
  • Stable With 2.2-μF Output Capacitor
• 1.8-V Compatible Control Input Threshold
• ESD Performance Tested Per JESD 22
  • 3500 V Human Body Model (A114-B, Class II)
  • 1000 V Charged Device Model (C101)
• Tiny 8-Terminal YZP Package (1.9 mm × 0.9mm, 0.5-mm Pitch, 0.5-mm Height) and WSON-8 (DRG) 3.0 mm × 3.0 mm

• Number of channels (#)
• 1, 2
• Vin (Min) (V)
• 1.62
• Vin (Max) (V)
• 4.5
• Imax (A)
• 0.2
• Ron (Typ) (mOhm)
• 350
• Shutdown current (ISD) (Typ) (uA)
• 6
• Quiescent current (Iq) (Typ) (uA)
• 85
• Soft start
• Fixed Rise Time
• Rise time (Typ) (us)
• 25
• Current limit type
• Fixed
• Features
• Thermal shutdown
• Operating temperature range (C)
• -40 to 85

TPS22949的完整型号有：TPS22949ADRGR、TPS22949AYZPR、TPS22949YZPR，以下是这些产品的关键参数及官网采购报价：

TPS22949ADRGR，工作温度：-40 to 85，封装：SON (DRG)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS22949ADRGR的批量USD价格：.557（1000+）

TPS22949AYZPR，工作温度：-40 to 85，封装：DSBGA (YZP)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS22949AYZPR的批量USD价格：.557（1000+）

TPS22949YZPR，工作温度：-40 to 85，封装：DSBGA (YZP)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS22949YZPR的批量USD价格：.557（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)