The TPS22960 is a small low-r_ON dual-channel load switch with controlled turnon. The devices contain two P-channel MOSFETs that can operate over an input voltage range of 1.62 V to 5.5 V. Each switch is independently controlled by on/off inputs (ON1 and ON2), which are capable of interfacing directly with low-voltage control signals. In TPS22960 a 85-Ω on-chip load resistor is added for quick discharge when the switch is turned off.

The rise time (slew-rate) of the device is internally controlled in order to avoid inrush current, and it can be slowed down if needed using the SR pin: at 3.3 V, TPS22960 features a 75-µs rise time with the SR pin tied to ground and 660-µs with the SR pin tied to high.

The TPS22960 is available in a space-saving 8-pin UQFN package and in an 8-pin SOT package. It is characterized for operation over the free-air temperature range of –40°C to 85°C.

• Integrated Dual-Load Switch
• Input Voltage Range: 1.62 V to 5.5 V
• Low ON-State Resistance
  • rON = 342 mΩ at VIN = 5.5 V
  • rON = 435 mΩ at VIN = 3.3 V
  • rON = 523 mΩ at VIN = 2.5 V
  • rON = 737 mΩ at VIN = 1.8 V
• 500-mA Maximum Continuous Switch Current
• Low Quiescent Current and Shutdown Current
• Controlled Switch Output Rise Time: 75 μs or 660 μs
• Integrated Quick Output Discharge Transistor
• ESD Performance Tested Per JESD 22
  • 2000-V Human Body Model (A114-B, Class II)
  • 1000-V Charged-Device Model (C101)
• 8-Pin SOT (DCN) Package: 3 mm × 3 mm
• 8-Pin UQFN (RSE) Package: 1.5 mm × 1.5 mm

• Number of channels (#)
• 2
• Vin (Min) (V)
• 1.62
• Vin (Max) (V)
• 5.5
• Imax (A)
• 0.5
• Ron (Typ) (mOhm)
• 435
• Shutdown current (ISD) (Typ) (uA)
• 0.25
• Quiescent current (Iq) (Typ) (uA)
• 0.35
• Soft start
• Adjustable Rise Time
• Rise time (Typ) (us)
• 75
• Current limit type
• None
• Features
• Quick output discharge
• Operating temperature range (C)
• -40 to 85

TPS22960的完整型号有：TPS22960DCNR、TPS22960RSER、TPS22960RSET，以下是这些产品的关键参数及官网采购报价：

TPS22960DCNR，工作温度：-40 to 85，封装：SOT-23 (DCN)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS22960DCNR的批量USD价格：.246（1000+）

TPS22960RSER，工作温度：-40 to 85，封装：UQFN (RSE)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAUAG，TI官网TPS22960RSER的批量USD价格：.283（1000+）

TPS22960RSET，工作温度：-40 to 85，封装：UQFN (RSE)-8，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAUAG，TI官网TPS22960RSET的批量USD价格：.34（1000+）

TPS22960EVM — TPS22960EVM 评估模块

借助 TPS22960EVM 评估模块 (EVM)，用户能够将电源连接到采用 8 引脚 µQFN 封装的负载开关并对其进行控制。可轻松地对导通电阻、输出压摆率和输出放电属性等参数进行评估

TPS22960 Unencrypted PSpice Transient Model Package (Rev. A)

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TIDA-00300 — 隔离式同步串行通信模块

此参考设计提供了隔离 I2C 或 SPI 通信线路的方法。电网基础设施应用中通常需要这种隔离，例如涉及高压的保护继电器和断路器。此参考设计提供电源隔离和信号隔离。