- 制造厂商:TI
- 产品类别:电源管理
- 技术类目:电源开关 - 电子保险丝和热插拔控制器
- 功能描述:具有 Oring、符合 AdvancedMC 标准的 8.5V 至 15V 双通道热插拔控制器
- 点击这里打开及下载TPS2359的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The TPS2359 dual-slot hot-plug controllers perform all necessary power interface functions for two AdvancedMC™ (Advanced Mezzanine Card) modules.
Two fully integrated 3.3-V channels provide inrush control, over-current protection, and FET ORing. Two 12-V channels provide the same functions using external FETs and sense resistors. The 3.3-V current limits are factory set to AdvancedMC™ compliant levels and the 12-V current limits are programmed using external sense resistors. The accurate current sense comparators of the TPS2359 satisfy the narrow ATCA™ AdvancedMC™ current limit requirements.
- ATCA AdvancedMC? Compliant
- Full Control for Two AdvancedMC Modules
- Independent 12-V Current Limit and Fast Trip
- 3.3-V and 12-V FET ORing for MicroTCA
- Internal 3.3-V Current Limit and ORing
- Power Good and Fault Reporting Through I2C
- I2C Programmable Fault Times and Current Limits
- FET Status Bits for all Channels
- 36-Pin PQFN Package
- 3-V and 12-V Interlock for AdvancedMC Compliance
- FET
- External
- Vin (Min) (V)
- 8.5
- Vin (Max) (V)
- 15
- Vabsmax_cont (V)
- 17
- Current limit (Min) (A)
- 0.01
- Current limit (Max) (A)
- 500
- Overcurrent response
- Circuit breaker, Current limiting
- Fault response
- Auto-retry, Latch-off
TPS2359的完整型号有:TPS2359RHHR、TPS2359RHHT,以下是这些产品的关键参数及官网采购报价:
TPS2359RHHR,工作温度:-40 to 85,封装:VQFN (RHH)-36,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-3-260C-168 HR,引脚镀层/焊球材料:NIPDAU,TI官网TPS2359RHHR的批量USD价格:5.06(1000+)
TPS2359RHHT,工作温度:-40 to 85,封装:VQFN (RHH)-36,包装数量MPQ:250个,MSL 等级/回流焊峰值温度:Level-3-260C-168 HR,引脚镀层/焊球材料:NIPDAU,TI官网TPS2359RHHT的批量USD价格:6.072(1000+)
TPS2359-EVM-GUI 1.0.0.7
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)