- 制造厂商：TI
- 产品类别：电源管理
- 技术类目：电源开关 - 电子保险丝和热插拔控制器
- 功能描述：适用于 PCIExpress 的 10.8V 至 13.2V 双通道热插拔控制器
- 点击这里打开及下载TPS2363的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The TPS2363 is a dual-slot PCIExpress hot plug controller with SMBus control and monitoring functions. There are sense resistor programmable current limits for the 3.3-V and 12-V supply.
The TPS2363 has one internal FET channel for AUX and two external FET channels for 3.3-V and 12-V per slot.
The TPS2363PFB is in 48-pin TQFP package.
The TPS2363 has bleed-down circuits to discharge the module before it is removed, when the voltages are below the low comparator threshold, slot PWROFF will be set indicating it is safe to remove the module. This is available over the SMBus.
Gate capacitors are used to set the rise time, this allows soft turn on of the slot avoiding power glitches.
The TPS2363 can be operated in direct mode, which does not use the SMBus.
The TPS2363PFB without the A/D converter in a 48-pin package is a drop in replacement for the competitive parts but with certain improvements.
- Meets PCIExpress Hot Plug Requirements
- Programmable 12-V Current Limit
- Inrush Current Limiting
- SMBus
- Direct Mode
- VAUX Internal FET
- General Purpose Inputs
- Available in a 48-Pin TQFP Package
- MIC2592B Pin Compatible with Additional Features
- FET
- External
- Vin (Min) (V)
- 10.8
- Vin (Max) (V)
- 13.2
- Vabsmax_cont (V)
- 15
- Current limit (Min) (A)
- 0.01
- Current limit (Max) (A)
- 500
- Overcurrent response
- Circuit breaker, Current limiting
- Fault response
- Latch-off
TPS2363的完整型号有：TPS2363PFB、TPS2363PFBR，以下是这些产品的关键参数及官网采购报价：
TPS2363PFB，工作温度：-40 to 85，封装：TQFP (PFB)-48，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS2363PFB的批量USD价格：3.278（1000+）
TPS2363PFBR，工作温度：-40 to 85，封装：TQFP (PFB)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS2363PFBR的批量USD价格：2.732（1000+）
TPS2363 IBIS Model
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
