- 制造厂商:TI
- 产品类别:电源管理
- 技术类目:USB 电源开关和充电端口控制器
- 功能描述:高电平有效且具有反向阻断功能的 0.13-1.4A 可调节具有恒定频率升压转换器的 ILIMIT 1.8-5.25V、80mΩ USB 电源开关
- 点击这里打开及下载TPS2501的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The TPS2500 and TPS2501 provide an integrated solution to meet USB 5-V power requirements from a 1.8-V to 5.25-V input supply. The features include a Hi-Speed USB compliant power output, output switch enable, current limit, and overcurrent fault reporting.
The 1.8-V to 5.25-V input can be supplied by sources including dc/dc regulated supplies (e.g., 3.3 V), or batteries such as single-cell Li+ or three-cell NiCd, NiMH, or alkaline.
The USB power-switch current limit is programmable via an external resistor from as low as 130 mA to as high as 1400 mA (typical). Two standard USB ports can be supported from a single TPS2500 or TPS2501 at the 1400-mA setting.
Additionally, the boost converter output is available as an auxiliary 5.1-V output to power additional loads. The total current supplied by the USB output and the auxiliary cannot exceed 1148 mA at VIN = 3 V.
- Integrated Synchronous Boost Converter and USB Current-Limit Power Switch
- Light-Load, High-Efficiency Eco-mode? Control Scheme (TPS2500) or Constant Frequency (TPS2501)
- 1.8-V to 5.25-V Input Voltage (2.2-V Minimum Start-Up Voltage)
- Adjustable USB Current Limit
- 130 mA to 1400 mA (Typical)
- Accurate 20% Current Limit at 1.4-A Setting
- Powers up to Two Standard USB Ports
- Auxiliary 5.1-V Output
- Fast Overcurrent-Response Time – 5 μs Typical
- Small 3-mm × 3-mm × 0.9-mm SON-10 Package
- 15-kV / 8-kV System-Level ESD Capable
- UL Listed - File No. E169910
- APPLICATIONS
- Portable Applications Using Single Li+ Cell
- USB Hosts Without Native 5-V Supplies
Eco-mode, PowerPAD are trademarks of Texas Instruments. All other trademarks are the property of their respective owners.
- Vin (Min) (V)
- 1.8
- Vin (Max) (V)
- 5.25
- Continuous current (Max) (A)
- 1.4
- Current limit (A)
- 0.13 to 1.4
- Product type
- Adjustable current limit, Power switch, Switch with boost
- Operating temperature range (C)
- -40 to 125
- Enable
- Active High
- Number of switches
- 1
- Rating
- Catalog
TPS2501的完整型号有:TPS2501DRCR、TPS2501DRCT,以下是这些产品的关键参数及官网采购报价:
TPS2501DRCR,工作温度:-40 to 125,封装:VSON (DRC)-10,包装数量MPQ:3000个,MSL 等级/回流焊峰值温度:Level-2-260C-1 YEAR,引脚镀层/焊球材料:NIPDAU,TI官网TPS2501DRCR的批量USD价格:.673(1000+)
TPS2501DRCT,工作温度:-40 to 125,封装:VSON (DRC)-10,包装数量MPQ:250个,MSL 等级/回流焊峰值温度:Level-2-260C-1 YEAR,引脚镀层/焊球材料:NIPDAU,TI官网TPS2501DRCT的批量USD价格:.808(1000+)
TPS2501EVM-337 — 具有低电压输入评估模块的用于 TPS2501 的配电开关
TPS2501DRCEVM 是用于德州仪器 (TI) 可调节限流配电开关系列的评估模块 (EVM)。这些 EVM 在 1.8V 至 5.25V 的电压范围内工作,可为 USB 设备提供 5V 的输出电压。板载跳线将输出限流设置为 0.5A 或 1A。测试点允许方便快捷地访问所有关键节点电压。PCB 板面上的丝印边框装有典型 USB 应用中常用的组件。TPS2501 采用带散热垫的 SON 封装。这些开关具有启用输入、过流状态输出和过热关断功能。