- 制造厂商：TI
- 产品类别：电源管理
- 技术类目：USB 电源开关和充电端口控制器
- 功能描述：USB 专用充电端口控制器 - 第 2 代
- 点击这里打开及下载TPS2514A的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The TPS251xx devices are USB dedicated charging port (DCP) controllers. An auto-detect feature monitors USB data line voltage, and automatically provides the correct electrical signatures on the data lines to charge compliant devices among the following dedicated charging schemes:
- Supports USB DCP shorting D+ line to D– line per USB battery charging specification, revision 1.2 (BC1.2)
- Supports shorted mode (shorting D+ line to D– line) per Chinese Telecommunication Industry Standard YD/T 1591-2009
- Supports USB DCP applying 2.7 V on D+ Line and 2 V on D- line (or USB DCP applying 2 V on D+ line and 2.7 V on D– line) (TPS2513, TPS2514)
- Supports USB DCP applying 2.7 V on D+ line and 2.7 V on D- line (TPS2513A, TPS2514A)
- Supports USB DCP applying 1.2 V on D+ and D– Lines
- Automatically Switch D+ and D– Lines Connections for an Attached Device
- Dual USB Port Controller (TPS2513, TPS2513A)
- Single USB port controller (TPS2514, TPS2514A)
- Operating range: 4.5 V to 5.5 V
- Available in SOT23-6 package
- Vin (Min) (V)
- 4.5
- Vin (Max) (V)
- 5.5
- Continuous current (Max) (A)
- —
- Current limit (A)
- —
- Product type
- Charge port controller
- Operating temperature range (C)
- -40 to 125
- Enable
- —
- Number of switches
- —
- Rating
- Catalog
TPS2514A的完整型号有：TPS2514ADBVR、TPS2514ADBVT，以下是这些产品的关键参数及官网采购报价：
TPS2514ADBVR，工作温度：-40 to 125，封装：SOT-23 (DBV)-6，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS2514ADBVR的批量USD价格：.32（1000+）
TPS2514ADBVT，工作温度：-40 to 125，封装：SOT-23 (DBV)-6，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS2514ADBVT的批量USD价格：.384（1000+）
TPS2513EVM-527 — TPS2513 双通道自动检测 USB 充电控制器评估模块
The Texas Instruments TPS2513EVM-527 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS2513 Dual Channel, Auto Detect USB Charging Controller. The EVM contains input and output connectors as well as control jumpers to ease evaluation of device featuresTPS25741AEVM-802 — 具有电源多路复用器和端口电源管理功能的 TPS25741A 评估模块
TPS25741A 评估模块 (TPS25741AEVM-802) 包含用于 TPS25741A 的评估和基准电路，TPS25741A 是专用的 USB PD Type-C 下行端口 (DFP) 控制器。TPS25741A 依靠上游转换器输出 5V、9V 和 15V。此 EVM 将基于 TPS54531 的降压转换器用作 TPS25741A 的电源。TPS25741EVM-802 — 具有电源多路复用器和端口电源管理功能的 TPS25741 评估模块
TPS25741 评估模块 (TPS25741EVM-802) 包含用于 TPS25741 的评估和基准电路，是专用的 USB PD Type-C 下行端口 (DFP) 控制器。TPS25741 依靠上游转换器输出 5V、12V 和 20V 电压 (TPS25741)。此 EVM 将基于 TPS54531 的降压转换器用作 TPS25741 的电源。
