The TPS28xx single-channel high-speed MOSFET drivers are capable of delivering peak currents of up to 2 A into highly capacitive loads. High switching speeds (t_r and t_f = 14 ns typ) are obtained with the use of BiCMOS outputs. Typical threshold switching voltages are 2/3 and 1/3 of V_CC. The design inherently minimizes shoot-through current.

A regulator is provided on TPS2816 through TPS2819 devices to allow operation with supply inputs between 14 V and 40 V. The regulator output can be used to power other circuits, provided power dissipation does not exceed package limitations. If the regulator is not required, V_DD (the regulator input) should be connected to V_CC. The TPS2816 and TPS2817 input circuits include an active pullup circuit to eliminate the need for an external resistor when using open-collector PWM controllers. The TPS2818 and TPS2819 are identical to the TPS2816 and TPS2817, except that the active pullup circuit is omitted. The TPS2828 and TPS2829 are identical to the TPS2818 and TPS2819, except that the internal voltage regulator is omitted, allowing quiescent current to drop to less than 15 uA when the inputs are high or low.

The TPS28xx series devices are available in 5-pin SOT-23 (DBV) packages and operate over an ambient temperature range of –40°C to 125°C.

• Low-Cost Single-Channel High-Speed MOSFET Driver
• ICC ...15-uA Max (TPS2828, TPS2829)
• 25-ns Max Rise/Fall Times and 40-ns Max Propagation Delay ...1-nF Load
• 2-A Peak Output Current
• 4-V to 14-V Driver Supply Voltage Range; Internal Regulator Extends Range to 40 V (TPS2816, TPS2817, TPS2818, TPS2819)
• 5-pin SOT-23 Package
• –40°C to 125°C Ambient-Temperature Operating Range
• Highly Resistant to Latch-ups

• Number of channels (#)
• 1
• Power switch
• MOSFET
• Peak output current (A)
• 2
• Input VCC (Min) (V)
• 4
• Input VCC (Max) (V)
• 14
• Features
• Hysteretic Logic
• Operating temperature range (C)
• -40 to 125
• Rise time (ns)
• 14
• Fall time (ns)
• 14
• Prop delay (ns)
• 24
• Input threshold
• CMOS
• Channel input logic
• Non-Inverting
• Input negative voltage (V)
• 0
• Rating
• Catalog
• Driver configuration
• Non-Inverting

TPS2829的完整型号有：TPS2829DBVR、TPS2829DBVT，以下是这些产品的关键参数及官网采购报价：

TPS2829DBVR，工作温度：-40 to 125，封装：SOT-23 (DBV)-5，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS2829DBVR的批量USD价格：.86（1000+）

TPS2829DBVT，工作温度：-40 to 125，封装：SOT-23 (DBV)-5，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS2829DBVT的批量USD价格：1.032（1000+）

TPS2829 Unencrypted PSpice Transient Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)