The TPS2830 and TPS2831 are MOSFET drivers for synchronous-buck power stages. These devices are ideal for designing a high-performance power supply using switching controllers that do not have MOSFET drivers. The drivers are designed to deliver 2.4-A peak currents into large capacitive loads. The high-side driver can be configured as a ground-reference driver or as a floating bootstrap driver. An adaptive dead-time control circuit eliminates shoot-through currents through the main power FETs during switching transitions, providing higher efficiency for the buck regulator. The TPS2830/31 drivers have additional control functions: ENABLE, SYNC, and CROWBAR. Both drivers are off when ENABLE is low. The driver is configured as a nonsynchronous-buck driver, disabling the low side driver when SYNC is low. The CROWBAR function turns on the low-side power FET, overriding the IN signal, for over-voltage protection against faulted high-side power FETs.

The TPS2830 has a noninverting input. The TPS2831 has an inverting input. The TPS2830/31 drivers are available in 14-terminal SOIC and thermally-enhanced TSSOP PowerPADE packages, and operate over a virtual junction temperature range of \x9640°C to 125°C.

• Floating Bootstrap or Ground-Reference High-Side Driver
• Adaptive Dead-Time Control
• 50-ns Max Rise/Fall Times and 100-ns Max Propagation Delay \x96 3.3-nF Load
• Ideal for High-Current Single or Multiphase Power Supplies
• 2.4-A Typical Peak Output Current
• 4.5-V to 15-V Supply Voltage Range
• Internal Schottky Bootstrap Diode
• SYNC Control for Synchronous or Nonsynchronous Operation
• CROWBAR for OVP, Protects Against Faulted High-Side Power FETs
• Low Supply Current....3-mA Typical
• \x9640°C to 125°C Operating Virtual Junction Temperature Range
• Available in SOIC and TSSOP PowerPAD Packages

PowerPAD is a trademark of Texas Instruments Incorporated.

• Bus voltage (Max) (V)
• 28
• Power switch
• MOSFET
• Input VCC (Min) (V)
• 4.5
• Input VCC (Max) (V)
• 15
• Peak output current (A)
• 2.4
• Rise time (ns)
• 50
• Operating temperature range (C)
• -40 to 125
• Rating
• Catalog
• Number of channels (#)
• 2
• Fall time (ns)
• 50
• Prop delay (ns)
• 75
• Iq (uA)
• 3000
• Input threshold
• CMOS
• Channel input logic
• CMOS
• Negative voltage handling at HS pin (V)
• 0
• Features
• Dead Time Control, Synchronous Rectification
• Driver configuration
• Inverting

TPS2831的完整型号有：TPS2831D，以下是这些产品的关键参数及官网采购报价：

TPS2831D，工作温度：-40 to 125，封装：SOIC (D)-14，包装数量MPQ：50个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS2831D的批量USD价格：1.316（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)