The TPS2834 and TPS2835 are MOSFET drivers for synchronous-buck power stages. These devices are ideal for designing a high-performance power supply using switching controllers that do not include on-chip MOSFET drivers. The drivers are designed to deliver minimum 2-A peak currents into large capacitive loads. The high-side driver can be configured as ground-reference or as floating-bootstrap. An adaptive dead-time control circuit eliminates shoot-through currents through the main power FETs during switching transitions, and provides high efficiency for the buck regulator. The TPS2834 and TPS2835 have additional control functions: ENABLE, SYNC, and CROWBAR. Both high-side and low-side drivers are off when ENABLE is low. The driver is configured as a nonsynchronous-buck driver disabling the low-side driver when SYNC is low. The CROWBAR function turns on the low-side power FET, overriding the IN signal, for overvoltage protection against faulted high-side power FETs.

The TPS2834 has a noninverting input, while the TPS2835 has an inverting input. These drivers are available n 14-terminal SOIC and thermally enhanced TSSOP PowerPAD™ packages and operate over a junction temperature range of –40°C to 125°C.

• Floating Bootstrap or Ground-Reference High-Side Driver
• Adaptive Dead-Time Control
• 50-ns Max Rise/Fall Times With 3.3-nF Load
• 2.4-A Typical Output Current
• 4.5-V to 15-V Supply Voltage Range
• TTL-Compatible Inputs
• Internal Schottky Bootstrap Diode
• SYNC Control for Synchronous or Nonsynchronous Operation
• CROWBAR for OVP, Protects Against Faulted High-Side Power FETs
• Low Supply Current....3 mA Typical
• Ideal for High-Current Single or Multiphase Power Supplies
• –40°C to 125°C Operating Virtual Junction Temperature Range
• Available in SOIC and TSSOP PowerPAD Packages

PowerPAD is a trademark of Texas Instruments Incorporated.

• Bus voltage (Max) (V)
• 28
• Power switch
• MOSFET
• Input VCC (Min) (V)
• 4.5
• Input VCC (Max) (V)
• 15
• Peak output current (A)
• 2.4
• Rise time (ns)
• 50
• Operating temperature range (C)
• -40 to 125
• Rating
• Catalog
• Number of channels (#)
• 2
• Fall time (ns)
• 40
• Prop delay (ns)
• 70
• Iq (uA)
• 3000
• Input threshold
• TTL
• Channel input logic
• TTL
• Negative voltage handling at HS pin (V)
• 0
• Features
• Dead Time Control, Synchronous Rectification
• Driver configuration
• Non-Inverting

TPS2834的完整型号有：TPS2834D、TPS2834DR、TPS2834PWP、TPS2834PWPR，以下是这些产品的关键参数及官网采购报价：

TPS2834D，工作温度：-40 to 125，封装：SOIC (D)-14，包装数量MPQ：50个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS2834D的批量USD价格：1.276（1000+）

TPS2834DR，工作温度：-40 to 125，封装：SOIC (D)-14，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS2834DR的批量USD价格：1.063（1000+）

TPS2834PWP，工作温度：-40 to 125，封装：HTSSOP (PWP)-14，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS2834PWP的批量USD价格：1.276（1000+）

TPS2834PWPR，工作温度：-40 to 125，封装：HTSSOP (PWP)-14，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS2834PWPR的批量USD价格：1.063（1000+）

TPS2834 PSpice Transient Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)