The TPS3610 family of supervisory circuits monitors and controls processor activity by providing backup-battery switchover for data retention of CMOS RAM. Other features include an additional power-fail comparator, low-line indication, watchdog function, battery-status indicator, manual switchover, and write protection for CMOS RAM.

The TPS3610 family allow usage of 3-V or 3.6-V lithium batteries as the backup supply in systems with, e.g., V_DD = 1.8 V. During power-on, RESET\ is asserted when the supply voltage (V_DD or V_BAT) becomes higher than 1.1 V. Thereafter, the supply-voltage supervisor monitors V_DD and keeps RESET\ output active as long as V_DD remains below the threshold voltage V_IT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time starts after V_DD has risen above the threshold voltage V_IT . When the supply voltage drops below the threshold voltage V_IT, the output becomes active (low) again.

The product spectrum is designed for supply voltages of 1.8 V and 5 V. The circuits are available in a 14-pin TSSOP package. TPS3610 devices are characterized for operation over a temperature range of –40°C to 85°C.

• Supply Current of 40 μA (Max)
• Battery Supply Current of 100 nA (Max)
• Precision Supply-Voltage Monitor, 1.8 V, 5 V; Other Options on Request
• Watchdog Timer With 800-ms Time-Out
• Backup-Battery Voltage Can Exceed VDD
• Power-On Reset Generator With Fixed 100-ms Reset Delay Time
• Battery-OK Output
• Voltage Monitor for Power-Fail or Low-Battery Monitoring
• Manual Switchover to Battery-Backup Mode
• Chip-Enable Gating ... 3 ns (at VDD = 5 V) Max Propagation Delay
• Battery-Freshness Seal
• 14-pin TSSOP Package
• Temperature Range ... –40°C to 85°C
• typical applications
  • Fax Machines
  • Set-Top Boxes
  • Advanced Voice Mail Systems
  • Portable Battery-Powered Equipment
  • Computer Equipment
  • Advanced Modems
  • Automotive Systems
  • Portable Long-Time Monitoring Equipment
  • Point of Sale Equipment

• Number of supplies monitored
• 2
• Threshold voltage 1 (Typ) (V)
• 1.77, 4.55
• Features
• Battery backup switchover, Chip enable gating, Manual reset capable, Watchdog timer
• Reset threshold accuracy (%)
• 2
• Output driver type/reset output
• Active-low, Push-pull
• Time delay (ms)
• 100
• Rating
• Catalog
• Watchdog timer WDI (sec)
• 0.8
• Operating temperature range (C)
• -40 to 85

TPS3610的完整型号有：TPS3610T50PW、TPS3610T50PWR、TPS3610U18PW，以下是这些产品的关键参数及官网采购报价：

TPS3610T50PW，工作温度：-40 to 85，封装：TSSOP (PW)-14，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS3610T50PW的批量USD价格：3.22（1000+）

TPS3610T50PWR，工作温度：-40 to 85，封装：TSSOP (PW)-14，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS3610T50PWR的批量USD价格：2.683（1000+）

TPS3610U18PW，工作温度：-40 to 85，封装：TSSOP (PW)-14，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS3610U18PW的批量USD价格：2.683（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)