The TPS3813 family of supervisory circuits provides circuit initialization and timing supervision, primarily for DSPs and processor-based systems.

During power on, RESET is asserted when supply voltage (V_DD) becomes higher than 1.1 V. Thereafter, the supervisory circuit monitors V_DD and keeps RESET active as long as V_DD remains below the threshold voltage (V_IT). An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time, t_d = 25 ms typical, starts after V_DD has risen above the threshold voltage (V_IT). When the supply voltage drops below the threshold voltage (V_IT), the output becomes active (low) again. No external components are required. All the devices of this family have a fixed-sense threshold voltage (V_IT) set by an internal voltage divider.

For safety critical applications the TPS3813 family incorporates a so-called window-watchdog with programmable delay and window ratio. The upper limit of the watchdog time-out can be set by either connecting WDT to GND, V_DD, or using an external capacitor. The lower limit and thus the window ratio is set by connecting WDR to GND or V_DD. The supervised processor now needs to trigger the TPS3813 within this window not to assert a RESET.

The product spectrum is designed for supply voltages of 2.5 V, 3 V, 3.3 V, and 5 V. The circuits are available in a 6-pin SOT-23 package.

The TPS3813 devices are characterized for operation over a temperature range of -55°C to 125°C.

• Controlled Baseline
  • One Assembly/Test Site, One Fabrication Site
• Extended Temperature Performance of -55°C to 125°C
• Enhanced Diminishing Manufacturing Sources (DMS) Support
• Enhanced Product-Change Notification
• Qualification Pedigree(1)
• Window-Watchdog With Programmable Delay and Window Ratio
• 6-Pin SOT-23 Package
• Supply Current of 9 μA (Typ)
• Power On Reset Generator With a Fixed Delay Time of 25 ms
• Precision Supply Voltage Monitor 2.5 V, 3 V, 3.3 V, 5 V
• Open-Drain Reset Output
• APPLICATIONS
  • Applications Using DSPs, Microcontrollers, or Microprocessors
  • Safety Critical Systems
  • Automotive Systems
  • Healing Systems

(1)Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.

• Number of supplies monitored
• 1
• Threshold voltage 1 (Typ) (V)
• 2.93
• Features
• Watchdog timer
• Reset threshold accuracy (%)
• 5.8
• Output driver type/reset output
• Active-low, Open-drain
• Time delay (ms)
• 25
• Rating
• HiRel Enhanced Product
• Watchdog timer WDI (sec)
• Programmable
• Operating temperature range (C)
• -55 to 125

TPS3813K33-EP的完整型号有：2T13K33MDBVREPG4、TPS3813K33MDBVREP、V62/06627-01XE，以下是这些产品的关键参数及官网采购报价：

2T13K33MDBVREPG4，工作温度：-55 to 125，封装：SOT-23 (DBV)-6，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网2T13K33MDBVREPG4的批量USD价格：3.659（1000+）

TPS3813K33MDBVREP，工作温度：-55 to 125，封装：SOT-23 (DBV)-6，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS3813K33MDBVREP的批量USD价格：3.659（1000+）

V62/06627-01XE，工作温度：-55 to 125，封装：SOT-23 (DBV)-6，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网V62/06627-01XE的批量USD价格：3.659（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)