The TPS4000x are controllers for low-voltage, non-isolated synchronous buck regulators. These controllers drive an N-channel MOSFET for the primary buck switch, and an N-channel MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion. In addition, the device controls the delays from main switch off to rectifier turn-on and from rectifier turn-off to main switch turn-on in such a way as to minimize diode losses (both conduction and recovery) in the synchronous rectifier with TI’s proprietary Predictive Gate Drive™ technology. The reduction in these losses is significant and increases efficiency. For a given converter power level, smaller FETs can be used, or heat sinking can be reduced or even eliminated.

The current-limit threshold is adjustable with a single resistor connected to the device. The TPS4000x controllers implement a closed-loop soft start function. Startup ramp time is set by a single external capacitor connected to the SS/SD pin. The SS/SD pin is also used for shutdown.

• Operating Input Voltage 2.25 V to 5.5 V
• Output Voltage as Low as 0.7 V
• 1% Internal 0.7 V Reference
• Predictive Gate Drive? N-Channel MOSFET Drivers for Higher Efficiency
• Externally Adjustable Soft-Start and Overcurrent Limit
• Source-Only Current or Source/Sink Current
• Versions for Starting into VOUT Pre-Bias
• 10-Lead MSOP PowerPad? Package for Higher Performance
• Thermal Shutdown
• Internal Boostrap Diode
• Fixed-Frequency, Voltage-Mode Control
  • TPS40000/1/4 300-kHz
  • TPS40002/3/5 600-kHz
• APPLICATIONS
  • Networking Equipment
  • Telecom Equipment
  • Base Stations
  • Servers
  • DSP Power
  • Power Modules

PowerPAD? and Predictive Gate Drive? are trademarks of Texas Instruments Incorporated.

• Vin (Min) (V)
• 2.25
• Vin (Max) (V)
• 5.5
• Vout (Min) (V)
• 0.7
• Vout (Max) (V)
• 4
• Iout (Max) (A)
• 15
• Iq (Typ) (uA)
• 1500
• Switching frequency (Min) (kHz)
• 300
• Switching frequency (Max) (kHz)
• 300
• Features
• Enable, Synchronous Rectification
• Regulated outputs (#)
• 1
• Number of phases
• 1
• Rating
• Catalog

TPS40000的完整型号有：TPS40000DGQ、TPS40000DGQR，以下是这些产品的关键参数及官网采购报价：

TPS40000DGQ，工作温度：-40 to 85，封装：HVSSOP (DGQ)-10，包装数量MPQ：80个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAUAG，TI官网TPS40000DGQ的批量USD价格：.818（1000+）

TPS40000DGQR，工作温度：-40 to 85，封装：HVSSOP (DGQ)-10，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAUAG，TI官网TPS40000DGQR的批量USD价格：.682（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)