The TPS4009x is a two-, three-, or four-phase programmable synchronous buck controller that is optimized for low-voltage, high-current applications powered by a 5-V to 15-V distributed supply. A multi-phase converter offers several advantages over a single power stage including lower current ripple on the input and output capacitors, faster transient response to load steps, improved power handling capabilities, and higher system efficiency.

Each phase can be operated at a switching frequency up to 1-MHz, resulting in an effective ripple frequency of up to 4-MHz at the input and the output in a four-phase application. A two-phase design operates 180 degrees out-of-phase, a three-phase design operates 120 degrees out-of-phase, and a four-phase design operates 90 degrees out-of-phase.

The number of phases is programmed by connecting the de-activated phase PWM output to the output of the internal 5-V LDO. In two-phase operation the even phase outputs should be de-activated.

The TPS4009x uses fixed frequency, peak current mode control with forced phase current balancing. When compared to voltage mode control, current mode results in a simplified feedback network and reduced input line sensitivity. Phase current is sensed by using either current sense resistors installed in series with output inductors or, for improved efficiency, by using the DCR (direct current resistance) of the filter inductors. The latter method involves generation of a current proportional signal with an R-C circuit.

The R-C values are selected by matching the time constants of the R-C circuit and the inductor; R-C = L/DCR. With either current sense method, the current signal is amplified and superimposed on the amplified voltage error signal to provide current mode PWM control.

An output voltage droop can be programmed to improve the transient window and reduce size of the output filter. Other features include a single voltage operation, a true differential sense amplifier, a programmable current limit, soft-start and a power good indicator.

• Two-, Three-, or Four-Phase Operation
• 5-V to 15-V Operating Range
• Programmable Switching Frequency Up to 1-MHz/Phase
• Current Mode Control With Forced Current Sharing(1)
• 1% Internal 0.7-V Reference
• Resistive Divider Set Output Voltage
• True Remote Sensing Differential Amplifier
• Resistive or DCR Current Sensing
• Current Sense Fault Protection
• Programmable Load Line
• Compatible with UCC37222 Predictive Gate Drive? Technology Drivers
• 24-Pin Space-Saving TSSOP Package
• 28-Pin QFN Package
• TPS40090: Binary Outputs
• TPS40091: 3-State Outputs
• APPLICATIONS
  • Internet Servers
  • Network Equipment
  • Telecommunications Equipment
  • DC Power Distributed Systems

(1) Patent pending. Predictive Gate Drive is a trademark of Texas Instruments.

• Vin (Min) (V)
• 4.5
• Vin (Max) (V)
• 15
• Vout (Min) (V)
• 0.7
• Vout (Max) (V)
• 3.3
• Iout (Max) (A)
• 120
• Iq (Typ) (uA)
• 4000
• Switching frequency (Min) (kHz)
• 100
• Switching frequency (Max) (kHz)
• 1000
• Features
• Enable, Power Good, Remote Sense
• Regulated outputs (#)
• 1
• Number of phases
• 4
• Rating
• Catalog

TPS40090的完整型号有：TPS40090PW、TPS40090PWR、TPS40090RHDR、TPS40090RHDT，以下是这些产品的关键参数及官网采购报价：

TPS40090PW，工作温度：-40 to 85，封装：TSSOP (PW)-24，包装数量MPQ：60个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS40090PW的批量USD价格：2.006（1000+）

TPS40090PWR，工作温度：-40 to 85，封装：TSSOP (PW)-24，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS40090PWR的批量USD价格：1.672（1000+）

TPS40090RHDR，工作温度：-40 to 85，封装：VQFN (RHD)-28，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS40090RHDR的批量USD价格：1.672（1000+）

TPS40090RHDT，工作温度：PropertyValue，封装：VQFN (RHD)-28，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAUAG，TI官网TPS40090RHDT的批量USD价格：2.006（1000+）

TPS40090EVM-001 — TPS40090EVM-001 评估模块

The TPS40090EVM?001 multi-phase dc-to-dc converter utilizes the TPS40090 multi-phase controller and UCC27222 predictive gate driver to step down a 12-V input to 1.5-V at 420 kHz. The output current is 100 A. The TPS40090 provides fixed-frequency, peak current-mode control with forced-phase current (...)

TPS40090EVM-002 — TPS40090EVM-002 评估模块

The TPS40090EVM-002 multi-phase dc-to-dc converter utilizes the TPS40090 multi-phase controller and TPS2834 adaptive driver to step down a 12V input to 1.5V at 420kHz. The output current can exceed 100A. The TPS40090 provides fixed-frequency, peak current-mode control with (...)

TPS40090 PSpice Transient Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

PMP9637 — 面向音频应用的汽车升压电源

PMP9637 四相升压电源采用紧凑外形，可通过高效的升压直流/直流转换将 8.5V 至 18V 输入汽车电池电压转换为 44V@17A 输出，适合音频应用。TPS40090 四相 PWM 控制器与两 (2) 个 UCC27324D 4A 双 FET 驱动器及 CSD18534Q5A 60V NexFET 结合使用，在仅 120mm x 70mm 的面积内提供 748W 输出功率。