The TPS40200 is a flexible nonsynchronous controller with a built-in 200-mA driver for P-channel FETs. The circuit operates with inputs up to 52 V, with a power-saving feature that turns off driver current once the external FET has been fully turned on. This feature extends the flexibility of the device, allowing it to operate with an input voltage up to 52 V, without dissipating excessive power. The circuit operates with voltage-mode feedback and has feed-forward input-voltage compensation that responds instantly to input-voltage change. The integral 700-mV reference is trimmed to 2%, providing the means to accurately control low voltages. Clock frequency, soft start, and overcurrent limit each are easily programmed by a single, external component. The part has undervoltage lockout, and can be easily synchronized to other controllers or a system clock to satisfy sequencing and/or noise-reduction requirements.

• Input Voltage Range 5.5 V to 52 V
• Output Voltage (700 mV to 87% VIN)
• 200-mA Internal P-Channel FET Driver
• Voltage Feed-Forward Compensation
• Undervoltage Lockout
• Programmable Fixed-Frequency (35 kHz to 500 kHz) Operation
• Programmable Short-Circuit Protection
• Hiccup Overcurrent Fault Recovery
• Programmable Closed-Loop Soft Start
• 700-mV 1% Reference Voltage
• External Synchronization
• APPLICATIONS
  • Down-Hole Drilling
  • High Temperature Environments
• Supports Extreme Temperature Applications
  • Controlled Baseline
  • One Assembly/Test Site
  • One Fabrication Site
  • Available in Extreme (–55°C/210°C) Temperature Range(1)
  • Extended Product Life Cycle
  • Extended Product-Change Notification
  • Product Traceability
  • Texas Instruments high temperature products utilize highly optimized silicon (die) solutions with design and process enhancements to maximize performance over extended temperatures.

(1) Custom temperature ranges available

• Vin (Min) (V)
• 4.5
• Vin (Max) (V)
• 52
• Vout (Min) (V)
• 0.7
• Vout (Max) (V)
• 46
• Iout (Max) (A)
• 3
• Iq (Typ) (uA)
• 1500
• Switching frequency (Min) (kHz)
• 35
• Switching frequency (Max) (kHz)
• 500
• Features
• Frequency Synchronization
• Regulated outputs (#)
• 1
• Number of phases
• 1
• Rating
• High Temp

TPS40200-HT的完整型号有：TPS40200HD、TPS40200HDR、TPS40200SHKJ、TPS40200SHKQ、TPS40200SKGD1，以下是这些产品的关键参数及官网采购报价：

TPS40200HD，工作温度：-55 to 175，封装：SOIC (D)-8，包装数量MPQ：75个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS40200HD的批量USD价格：66.02（1000+）

TPS40200HDR，工作温度：-55 to 175，封装：SOIC (D)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS40200HDR的批量USD价格：64.02（1000+）

TPS40200SHKJ，工作温度：-55 to 210，封装：CFP (HKJ)-8，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：Call TI，TI官网TPS40200SHKJ的批量USD价格：131.285（1000+）

TPS40200SHKQ，工作温度：-55 to 210，封装：CFP (HKQ)-8，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：AU，TI官网TPS40200SHKQ的批量USD价格：84.7（1000+）

TPS40200SKGD1，工作温度：-55 to 210，封装： (KGD)-0，包装数量MPQ：100个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：Call TI，TI官网TPS40200SKGD1的批量USD价格：62（1000+）

TPS40200EVM-001 — TPS40200 12V 输入、3.3V 输出、2.5A 评估模块

TPS40200EVM-001 is designed to operate with an 8V to 16V input and to produce a regulated 3.3V output with a load current from 0.125A to 2.5A. The TPS40200EVM-001 demonstrates the use of the TPS40200 in a typical buck converter application. The board sacrifices some (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)