The TPS51631A is a driverless step-down controller that is fully compliant with the SVID communications protocol, meeting the Intel VR12.5 specification. Advanced control features such as D-CAP+ architecture with overlapping pulse support undershoot reduction (USR) and overshoot reduction (OSR) provide fast transient response, lowest output capacitance and high efficiency. The TPS51631A also supports single-phase operation in CCM or DCM for light-load efficiency. The TPS51631A integrates the full complement of VR12.5 I/O features including VR_READY (PGOOD), ALERT and VR_HOT. The SVID interface address allows programming from 0 to 7. Adjustable control of VCPU slew rate and voltage positioning round out the VR12.5 features. Paired with the new TPS51604 FET gate driver, the solution delivers exceptionally high speed and low switching loss. The TPS51631A works with selected TI Power Stage™ products for optimum efficiency as well as DrMOS products.

The TPS51631A is available in space saving, thermally enhanced 32-pin QFN package that operates from –40°C to 105°C.

• Intel? Serial VID (SVID) Compliant
• 1-, 2-, or 3-Phase Operation
• Full VR12.5 Mobile Feature Set Including Digital Current Monitor and PS3 Operation
• 8-Bit DAC with 0.50-V to 2.30-V Output Range
• Optimized Efficiency at Light and Heavy Loads
• 8 Independent Levels of Overshoot Reduction (OSR) and Undershoot Reduction (USR)
• Driverless Configuration for Efficient High-Frequency Switching
• Supports Discrete, Power Block, Power Stage or DrMOS MOSFET Implementations
• Accurate, Adjustable Voltage Positioning
• 300-kHz to 1-MHz Frequency Selections
• Patented AutoBalance Phase Balancing
• Selectable 8-level Current Limit
• 4.5-V to 28-V Conversion Voltage Range
• Small, 4 × 4, 32-Pin, QFN PowerPad Package

• Vin (Min) (V)
• 4.5
• Vin (Max) (V)
• 28
• Vout (Min) (V)
• 0.5
• Vout (Max) (V)
• 2.3
• Iout (Max) (A)
• 95
• Iq (Typ) (uA)
• 500
• Switching frequency (Min) (kHz)
• 300
• Switching frequency (Max) (kHz)
• 1000
• Features
• SVID
• Regulated outputs (#)
• 1
• Number of phases
• 3
• Rating
• Catalog

TPS51631A的完整型号有：TPS51631ARSMR、TPS51631ARSMT，以下是这些产品的关键参数及官网采购报价：

TPS51631ARSMR，工作温度：-40 to 105，封装：VQFN (RSM)-32，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS51631ARSMR的批量USD价格：1.791（1000+）

TPS51631ARSMT，工作温度：-40 to 105，封装：VQFN (RSM)-32，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS51631ARSMT的批量USD价格：2.149（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)