The TPS51727 is a complete, step down controller with integrated gate drivers. The PCNT pin enables operation in dual or single-phase mode to optimize efficiency depending on the load requirements. The advanced D-CAP+ architecture provides fast transient response with minimum output capacitance. The DAC supports VID-on-the-fly transitions to optimize the output voltage to the operating state of the system to meet idle power requirements. The auto-skip feature of the TPS51727 optimizes light-load efficiency in both single and dual phase operation. System management features include an adjustable thermal sensor, output power monitoring and sleep state controls. Adjustable control of VOUT slew rate and voltage positioning are provided. In addition, the TPS51727 includes two high-current MOSFET gate drivers to drive high and low side N-channel MOSFETs with exceptionally high speed and low switching loss The PCNT and VID0 through VID4, pins have flexible LV I/O thresholds that enable interface with logic voltages from 1.0 V to 3.6 V. The TPS51727 is packaged in a space saving, thermally enhanced, RoHS compliant 40-pin QFN and is rated to operate from -10°C to 100°C.

• Seamless Phase Add/Drop Enables Maximum Efficiency Under Any Load Condition
• Minimum External Parts Count
• ±8 mV VOUT Accuracy Over Line/Load/Temp.
• 5-Bit DAC with 0.4-V to 1.25-V Output Range Supports Wide Range of Applications
• Optimized Efficiency at Light & Heavy Loads
• Patent Pending Output Overshoot Reduction (OSR?)
• Accurate, Adjustable Voltage Positioning
• Selectable 200/300/400/500 kHz Frequency
• Pat. pending AutoBalance Phase Balancing
• Supports Resistor or Inductor DCR Current Sensing
• Accurate, Selectable Current Limit
• 4.5-V to 28-V Conversion Voltage Range
• Fast MOSFET Driver w/Integrated Boost Diode
• Integrated OVP Can Be Disabled Thermal Sensor and Output Power Monitor
• Small 6 × 6, 40-Pin QFN PowerPAD? Package
• APPLICATIONS
  • High-Current, Low-Voltage Applications for Adapter, Battery, NVDC or 5-V/12-V Rails

• Vin (Min) (V)
• 4.5
• Vin (Max) (V)
• 28
• Vout (Min) (V)
• 0.4
• Vout (Max) (V)
• 1.25
• Iout (Max) (A)
• 20
• Iq (Typ) (uA)
• 2500
• Switching frequency (Min) (kHz)
• 200
• Switching frequency (Max) (kHz)
• 500
• Features
• Power Good
• Regulated outputs (#)
• 1
• Number of phases
• 2
• Rating
• Catalog

TPS51727的完整型号有：TPS51727RHAR、TPS51727RHAT，以下是这些产品的关键参数及官网采购报价：

TPS51727RHAR，工作温度：-10 to 100，封装：VQFN (RHA)-40，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS51727RHAR的批量USD价格：1.258（1000+）

TPS51727RHAT，工作温度：-10 to 100，封装：VQFN (RHA)-40，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS51727RHAT的批量USD价格：1.51（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)