The TPS54225 is an adaptive on-time D-CAP2™ mode synchronous buck converter. The TPS54225 enables system designers to complete the suite of various end equipment’s power bus regulators with a cost effective, low component count, low standby current solution. The main control loop for the TPS54225 uses the D-CAP2™ mode control which provides a fast transient response with no external compensation components.

The TPS54225 also has a proprietary circuit that enables the device to adapt to both low equivalent series resistance (ESR) output capacitors, such as POSCAP or SP-CAP, and ultra-low ESR ceramic capacitors. The device operates from 4.5-V to 18-V V_CC input , and from 2-V to 18-V VIN input power supply voltage. The output voltage can be programmed between 0.76 V and 5.5 V. The device also features an adjustable slow start time and a power good function. The TPS54225 is available in the 14 pin HTSSOP package, and designed to operate from –40°C to 85°C.

• D-CAP2? Mode Enables Fast Transient Response
• Low Output Ripple and Allows Ceramic Output Capacitor
• Wide VCC Input Voltage Range: 4.5 V to 18 V
• Wide VIN Input Voltage Range: 2 V to 18 V
• Output Voltage Range: 0.76 V to 5.5 V
• Highly Efficient Integrated FET’s Optimized for Lower Duty Cycle Applications – 160 mΩ (High Side) and 110 mΩ (Low Side)
• High Efficiency, less than 10 μA at shutdown
• High Initial Bandgap Reference Accuracy
• Adjustable Soft Start
• Pre-Biased Soft Start
• 700-kHz Switching Frequency (fSW)
• Cycle-By-Cycle Overcurrent Limit
• Power Good Output
• APPLICATIONS
  • Wide Range of Applications for Low Voltage System
    • Digital TV Power Supply
    • High Definition Blu-ray Disc? Players
    • Networking Home Terminal
    • Digital Set Top Box (STB)

D-CAP2, PowerPAD are trademarks of Texas Instruments. Blu-ray Disc is a trademark of Blu-ray Disc Association.

• Vin (Min) (V)
• 4.5
• Vin (Max) (V)
• 18
• Vout (Min) (V)
• 0.76
• Vout (Max) (V)
• 5.5
• Iout (Max) (A)
• 2
• Iq (Typ) (uA)
• 800
• Switching frequency (Min) (kHz)
• 700
• Switching frequency (Max) (kHz)
• 700
• Features
• Enable, Power Good, Synchronous Rectification, Soft Start Adjustable
• Rating
• Catalog
• Regulated outputs (#)
• 1
• Control mode
• D-CAP2
• Duty cycle (Max) (%)
• 90

TPS54225的完整型号有：TPS54225PWP、TPS54225PWPR，以下是这些产品的关键参数及官网采购报价：

TPS54225PWP，工作温度：-40 to 85，封装：HTSSOP (PWP)-14，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS54225PWP的批量USD价格：.752（1000+）

TPS54225PWPR，工作温度：-40 to 85，封装：HTSSOP (PWP)-14，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS54225PWPR的批量USD价格：.635（1000+）

TPS54225EVM-538 — 同步降压 DCAP2 模式转换器评估模块

TPS54225EVM-538 评估模块是单相同步降压转换器，它在 2A 的电流下从 5V 至 17V 输入中产生 1.05V 电压。用户指南介绍了 TPS54225EVM-538 的性能。TPS54225 是一款单相、自适应接通时间 D-CAP2 模式同步降压转换器，它需要很少的外部组件。D-CAP2 控制电路针对低 ESR 输出电容器（例如 POSCAP、SP-CAP 或陶瓷电容器）进行了优化，并且具有快速瞬态响应，无需外部补偿。开关频率被内部设置为 700kHz 的额定频率。TPS54225 封装内部采用了高端和低端开关 MOSFET 以及栅极驱动器电路。MOSFET (...)

TPS54225 Unencrypted PSpice Transient Model Package (Rev. A)

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TIDA-010011 — 适用于保护继电器处理器模块的高效电源架构参考设计

This reference design showcases various power architectures for generating multiple voltage rails for an application processor module, requiring >1A load current and high efficiency . The required power supply is generated using 5-, 12- or 24-V DC input from the backplane. Power supplies are (...)

PMP6776 — Xilinx Kintex 7 Low Cost reference design

PMP6776 是低成本非隔离型同步降压电源。此设计使用 TPS56121 和 TPS54620 同步降压转换器以及 TPS54425 和 TPS54225 降压开关产生 7 个输出。其功能包括：输入电压范围为 10.8V 至 13.2V，输出为 6A 下 1V、4A 下 1.5V、6A 下 1.8V、2A 下 2V、8A 下 2.5V、8A 下 3.3V、4A 下 1.2V。