TPS54283 and TPS54286 are dual output non-synchronous buck converters capable of supporting 2-A output applications that operate from a 4.5-V to 28-V input supply voltage, and require output voltages between 0.8 V and 90% of the input voltage.

With internally-determined operating frequency, soft start time, and control loop compensation, these converters provide many features with a minimum of external components. Channel 1 overcurrent protection is set at 3 A, while Channel 2 overcurrent protection level is selected by connecting a pin to ground, to BP, or left floating. The setting levels are used to allow for scaling of external components for applications not needing the full load capability of both outputs.

The outputs may be enabled independently, or may be configured to allow either ratiometric or sequential startup sequencing. Additionally, the two outputs may also be powered from different sources.

• 4.5-V to 28-V Input Range
• Output Voltage Range 0.8 V to 90% of Input Voltage
• Output Current Up to 2 A
• Two Fixed Switching Frequency Versions:
  • TPS54283: 300 kHz
  • TPS54286: 600 kHz
• Two Selectable Levels of Overcurrent Protection (Output 2)
• 0.8-V 1.5% Voltage Reference
• 2.1-ms Internal Soft Start
• Dual PWM Outputs 180° Out-of-Phase
• Ratiometric or Sequential Startup Modes Selectable by a Single Pin
• 100-m Internal High-Side MOSFETs
• Current Mode Control
• Internal Compensation (See Page 16)
• Pulse-by-Pulse Overcurrent Protection
• Thermal Shutdown Protection at 148°C
• 14-Pin PowerPAD? HTSSOP package
• APPLICATIONS
  • Set Top Box
  • Digital TV
  • Power for DSP
  • Consumer Electronics

PowerPAD Is a trademark of Texas Instruments. All other trademarks are the property of their respective owners.

• Vin (Min) (V)
• 4.5
• Vin (Max) (V)
• 28
• Vout (Min) (V)
• 0.8
• Vout (Max) (V)
• 25.2
• Iout (Max) (A)
• 2
• Iq (Typ) (uA)
• 1800
• Switching frequency (Min) (kHz)
• 300
• Switching frequency (Max) (kHz)
• 300
• Features
• Enable, Phase Interleaving
• Rating
• Catalog
• Regulated outputs (#)
• 2
• Control mode
• Current Mode
• Duty cycle (Max) (%)
• 90

TPS54283的完整型号有：TPS54283PWP、TPS54283PWPR，以下是这些产品的关键参数及官网采购报价：

TPS54283PWP，工作温度：-40 to 85，封装：HTSSOP (PWP)-14，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS54283PWP的批量USD价格：1.133（1000+）

TPS54283PWPR，工作温度：-40 to 85，封装：HTSSOP (PWP)-14，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS54283PWPR的批量USD价格：.944（1000+）

TPS54383EVM — TPS54383 12V 输入、双路 5V 和 3.3V 输出、2A 评估模块

The TPS54383EVM evaluation module (EVM) is a dual non-synchronous buck converter providing fixed 5.0V and 3.3V output at up to 2A each from a 12V input bus.

The EVM is designed to start up from a single supply, so no additional bias voltage is required for start-up. The module uses the TPS54383 (...)

TPS54283 PSpice Transient Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)