The TPS54325 device is an adaptive on-time D-CAP2™ mode synchronous buck converter. The TPS54325 device enables system designers to complete the suite of various end equipment’s power bus regulators with a cost effective, low component count, low standby current solution.

The main control loop for the TPS54325 uses the D-CAP2™ mode control which provides a very fast transient response with no external components. The TPS54325 also has a proprietary circuit that enables the device to adapt to both low equivalent series resistance (ESR) output capacitors, such as POSCAP or SP-CAP, and ultra-low ESR ceramic capacitors. The device operates from 4.5-V to 18-V VCC input , and from 2.0-V to 18-V VIN input power supply voltage. The output voltage can be programmed between 0.76 V and 5.5 V. The device also features an adjustable slow start time and a power good function. The TPS54325 is available in the 14 pin HTSSOP package, and designed to operate from –40°C to 85°C.

• D-CAP2? Mode Enables Fast Transient Response
• Low Output Ripple and Allows Ceramic Output Capacitor
• Wide VCC Input Voltage Range: 4.5 V to 18 V
• Wide VIN Input Voltage Range: 2.0 V to 18 V
• Output Voltage Range: 0.76 V to 5.5 V
• Highly Efficient Integrated FET’s Optimized for Lower Duty Cycle Applications – 120 mΩ (High Side) and 70 mΩ (Low Side)
• High Efficiency, less than 10 μA at shutdown
• High Initial Bandgap Reference Accuracy
• Adjustable Soft Start
• Pre-Biased Soft Start
• 700-kHz Switching Frequency (fSW)
• Cycle By Cycle Over Current Limit
• Power Good Output

• Vin (Min) (V)
• 4.5
• Vin (Max) (V)
• 18
• Vout (Min) (V)
• 0.76
• Vout (Max) (V)
• 5.5
• Iout (Max) (A)
• 3
• Iq (Typ) (uA)
• 850
• Switching frequency (Min) (kHz)
• 700
• Switching frequency (Max) (kHz)
• 700
• Features
• Enable, Power Good, Synchronous Rectification, Soft Start Adjustable
• Rating
• Catalog
• Regulated outputs (#)
• 1
• Control mode
• D-CAP2
• Duty cycle (Max) (%)
• 90

TPS54325的完整型号有：TPS54325PWP、TPS54325PWPR，以下是这些产品的关键参数及官网采购报价：

TPS54325PWP，工作温度：-40 to 85，封装：HTSSOP (PWP)-14，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS54325PWP的批量USD价格：.812（1000+）

TPS54325PWPR，工作温度：-40 to 85，封装：HTSSOP (PWP)-14，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS54325PWPR的批量USD价格：.677（1000+）

TPS54325EVM — 5V 至 17V 输入、3A 转换器评估模块

TPS54325EVM（评估模块）是一款组装完备且经过测试的电路，用于评估 TPS54428 同步降压转换器。此 EVM 在 4.5V 至 18V 输入电压范围内运行，且可在最高 3A 的负载下提供 1.05V 的输出电压。TPS54325 的主控制环路采用 D-CAP2™ 模式控制，无需在相位补偿中使用外部组件即可实现极快的瞬态响应。该解决方案还具有可调软启动特性且集成了电源正常指示功能，因此灵活性很高。

TPS54325 Unencrypted PSpice Transient Model Package (Rev. A)

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TIDA-010011 — 适用于保护继电器处理器模块的高效电源架构参考设计

This reference design showcases various power architectures for generating multiple voltage rails for an application processor module, requiring >1A load current and high efficiency . The required power supply is generated using 5-, 12- or 24-V DC input from the backplane. Power supplies are (...)

PMP5411 — 通用 AC 40W 机顶盒电源 (1.2V (3A))

此参考评估模块是机顶盒内完整电源树的示例。
其功能是执行交流/直流转换，然后执行直流/直流转换，以获得 1.2V/1.8V/2.5V/3.3V/5V 电源轨。

PMP8251 — 用于 Xilinx FPGA Zynq 7 的电源解决方案

该参考设计具有多个 TPS54325 和其他功率器件，适用于 Xilinx Zynq FPGA。该参考设计可通过 12V 输入提供 Zynq FPGA（包括 DDR3 存储器）所需的电源轨。