The TPS54350 is a medium output current
synchronous buck PWM converter with an integrated high side MOSFET and a gate driver for an optional low side external MOSFET. Features include a high performance voltage error amplifier that enables maximum performance under transient conditions and flexibility in choosing the output filter inductors and capacitors. The TPS54350 has an under-voltage-lockout circuit to prevent start-up until the input voltage reaches 4.5 V; an internal slow-start circuit to limit in-rush currents; and a power good output to indicate valid output conditions. The synchronization feature is configurable as either an input or an output for easy 180° out of phase synchronization.

The TPS54350 device is available in a thermally enhanced 16-pin TSSOP (PWP) PowerPAD™ package. Texas Instruments provides evaluation modules and the SWIFT™ designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.

• Controlled Baseline
  • One Assembly/Test Site, One Fabrication Site
• Extended Temperature Performance of -55°C to 125°C
• Enhanced Diminishing Manufacturing Sources (DMS) Support
• Enhanced Product-Change Notification
• Qualification Pedigree(1)
• 100 mW, 4.5-A Peak MOSFET Switch for High Efficiency at 3-A Continuous Output Current
• Uses External Lowside MOSFET or Diode
• Output Voltage Adjustable Down to 0.891 V With 2% Accuracy
• Synchronizes to External Clock
• 180° Out of Phase Synchronization
• Wide PWM Frequency - Fixed 250 kHz, 500 kHz or Adjustable 250 kHz to 700 kHz
• Internal Slow Start
• Load Protected by Peak Current Limit and Thermal Shutdown
• Adjustable Undervoltage Lockout
• 16-Pin TSSOP PowerPAD? Package
• APPLICATIONS
  • Industrial & Commercial Low Power Systems
  • LCD Monitors and TVs
  • Computer Peripherals
  • Point of Load Regulation for High Performance DSPs, FPGAs, ASICs, and Microprocessors

PowerPAD, SWIFT are trademarks of Texas Instruments. (1)Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.

• Vin (Min) (V)
• 4.5
• Vin (Max) (V)
• 20
• Vout (Min) (V)
• 0.9
• Vout (Max) (V)
• 12
• Iout (Max) (A)
• 3
• Iq (Typ) (uA)
• 5000
• Switching frequency (Min) (kHz)
• 250
• Switching frequency (Max) (kHz)
• 700
• Features
• Enable, Frequency Synchronization, Phase Interleaving, Power Good, Synchronous Rectification
• Rating
• HiRel Enhanced Product
• Regulated outputs (#)
• 1
• Control mode
• Voltage Mode
• Duty cycle (Max) (%)
• 80

TPS54350-EP的完整型号有：TPS54350MPWPREP、V62/06610-01XE，以下是这些产品的关键参数及官网采购报价：

TPS54350MPWPREP，工作温度：-55 to 125，封装：HTSSOP (PWP)-16，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS54350MPWPREP的批量USD价格：3.392（1000+）

V62/06610-01XE，工作温度：-55 to 125，封装：HTSSOP (PWP)-16，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网V62/06610-01XE的批量USD价格：3.392（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)