The TPS61043 is a high-frequency boost converter with constant current output that drives white LEDs or similar. The LED current is set with the external sense resistor (R_S) and is directly regulated by the feedback pin (FB) that regulates the voltage across the sense resistor R_S to 252 mV (typical). To control LED brightness, the LED current can be pulsed by applying a PWM (pulse width modulated) signal with a frequency range of 100 Hz to 50 kHz to the control pin (CTRL). To allow higher flexibility, the device can be configured so that the brightness is controlled by an analog signal as well, as described in Application Information. To avoid possible leakage currents through the LEDs during shutdown, the control pin (CTRL) disables the device and disconnects the LEDs from ground. For maximum safety during operation, the output has integrated overvoltage protection that prevents damage to the device by limiting the output voltage to typically 18 V in case of a high-impedance output (for example, faulty LED). The TPS61043 device provides a solution for applications where higher LED currents or more than four LEDs in series must be powered.

• Current Source With 18-V Overvoltage Protection
• Powers up to 4 LEDs in Series
• Input Voltage Range: 1.8 V to 6 V
• Internal 30-V Switch
• Up to 85% Efficiency
• Precise Brightness Control Using PWM Signal or Analog Signal
• Switching Frequency up to 1 MHz
• Internal Power MOSFET Switch 400 mA
• Operates With Small Output Capacitors Down to 100 nF
• Disconnects LEDs During Shutdown
• No Load Quiescent Current 38 μA Typical
• Shutdown Current 0.1 μA Typical
• Available in a Small 3-mm × 3-mm QFN Package

• Number of channels (#)
• 1
• Vin (Min) (V)
• 1.8
• Vin (Max) (V)
• 6
• Vout (Min) (V)
• 1.8
• Vout (Max) (V)
• 16.9
• Type
• Inductive
• Switching frequency (Max) (kHz)
• 1000
• LED current per channel (mA)
• 50
• Peak efficiency (%)
• 85
• Topology
• Boost
• Features
• Load Disconnect During Shutdown
• Operating temperature range (C)
• -40 to 85

TPS61043的完整型号有：TPS61043DRBR、TPS61043DRBT，以下是这些产品的关键参数及官网采购报价：

TPS61043DRBR，工作温度：-40 to 85，封装：SON (DRB)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS61043DRBR的批量USD价格：.42（1000+）

TPS61043DRBT，工作温度：-40 to 85，封装：SON (DRB)-8，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS61043DRBT的批量USD价格：.504（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)