The TPS6106x is a high-frequency, synchronous boost converter with constant current output to drive up to 5 white LEDs. For maximum safety, the device features integrated overvoltage and an advanced short-circuit protection when the output is shorted to ground. The device operates with 1-MHz fixed switching frequency to allow for the use of small external components and to simplify possible EMI problems. The device comes with three different overvoltage protection thresholds (14 V/18 V/23 V) to allow inexpensive and small-output capacitors with lower voltage ratings. The LED current is initially set with the external sense resistor Rs, and the feedback voltage is regulated to 500 mV or 250 mV, depending on the ILED pin configuration. Digital brightness control is implemented by applying a simple digital signal to the ILED pin. Alternatively, a PWM signal up to 1 kHz can be applied to the enable pin to control the LED brightness. During shutdown, the output is disconnected from the input to avoid leakage current through the LEDs.

• LED Driver With Integrated Overvoltage and Short-Circuit Protection
• 2.7-V to 6-V Input Voltage Range
• 500-mV/250-mV Feedback Voltage
• TPS61060 Powers Up to 3 LEDs
• TPS61061 Powers Up to 4 LEDs
• TPS61062 Powers Up to 5 LEDs
• PWM Brightness Control on Enable
• Digital Brightness Control on ILED
• 1-MHz Fixed Switching Frequency
• 400-mA Internal Power MOSFET Switch
• LEDs Disconnected During Shutdown
• Operates With Small-Output Capacitors Down to 220 nF
• Up to 80% Efficiency
• 8-Pin NanoFree? Package (Chipscale, CSP)
• 3 × 3-mm QFN Package

• Number of channels (#)
• 1
• Vin (Min) (V)
• 2.7
• Vin (Max) (V)
• 6
• Vout (Min) (V)
• 2.7
• Vout (Max) (V)
• 15
• Type
• Inductive
• Switching frequency (Max) (kHz)
• 1200
• LED current per channel (mA)
• 50
• Peak efficiency (%)
• 83
• Topology
• Boost
• Features
• Load Disconnect During Shutdown
• Operating temperature range (C)
• -40 to 85

TPS61060的完整型号有：TPS61060DRBR、TPS61060YZFR、TPS61060YZFT，以下是这些产品的关键参数及官网采购报价：

TPS61060DRBR，工作温度：-40 to 85，封装：SON (DRB)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS61060DRBR的批量USD价格：.518（1000+）

TPS61060YZFR，工作温度：-40 to 85，封装：DSBGA (YZF)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS61060YZFR的批量USD价格：.596（1000+）

TPS61060YZFT，工作温度：-40 to 85，封装：DSBGA (YZF)-8，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS61060YZFT的批量USD价格：.699（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)