The TPS61096A is a high output voltage boost converter with ultra-low quiescent current. It is designed for products that require high efficiency at light load conditions powered by either two-cell alkaline, or one-cell Li-Ion or Li-polymer battery.

The TPS61096A integrates a 30-V power switch and a power diode. It can output up to 28 Volts. The TPS61096A uses a PFM peak current control scheme to obtain the highest efficiency over a wide range of input and output load conditions. It only consumes 1 µA quiescent current and can achieve up to 70% efficiency under 10-µA load condition.

The TPS61096A can also support selective inductor peak current. With 250-mA current limit, the TPS61096A can reduce inductor ripple so that it reduces external component size for light load applications. With 500 mA current limit, the TPS61096A can provide 30 mA output current for a conversion from 3.3 V to 18 V.

The TPS61096A integrates two-channel low-power level shifters to convert low level signals to output voltage level signals for specific applications. It only consumes 1-µA static current per channel and ensures very low static and dynamic power consumption across the entire output range.

The TPS61096A is available in a 12-pin 3.0-mm x 2.0-mm WSON Package.

• 1 μA ultra-low IQ into VIN pin
• Operating Input Voltage from 1.8 V to 5.5 V
• Adjustable Output Voltage from 4.5 V to 28 V
• Selectable Inductor Peak Current:
  • 0.25 A and 0.5 A
• Integrated Power Diode
• Integrated Level Shifters
• 70% Efficiency at 10 μA load
• 12-Pin 3-mm x 2-mm WSON Package
• Create a Custom Design Using the TPS61096A With the WEBENCH? Power Designer

• Vin (Min) (V)
• 1.8
• Vin (Max) (V)
• 5.5
• Vout (Min) (V)
• 4.5
• Vout (Max) (V)
• 28
• Switch current limit (Typ) (A)
• 0.5
• Regulated outputs (#)
• 1
• Switching frequency (Min) (kHz)
• 200
• Switching frequency (Max) (kHz)
• 3000
• Iq (Typ) (mA)
• 0.001
• Features
• Adjustable Current Limit, Enable, Light Load Efficiency
• Duty cycle (Max) (%)
• 90
• Rating
• Catalog

TPS61096A的完整型号有：TPS61096ADSSR、TPS61096ADSST，以下是这些产品的关键参数及官网采购报价：

TPS61096ADSSR，工作温度：-40 to 85，封装：WSON (DSS)-12，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS61096ADSSR的批量USD价格：.464（1000+）

TPS61096ADSST，工作温度：-40 to 85，封装：WSON (DSS)-12，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网TPS61096ADSST的批量USD价格：.557（1000+）

TPS61096EVM-787 — 具有超低静态电流的 TPS61096A 28V 输出电压升压转换器的评估板

TPS61096EVM 用于评估超低静态电流、高输出电压升压转换器 TPS61096 的电气和热性能。TPS61096EVM 的外部组件经过选择，可涵盖大多数正常应用条件。这些组件可根据 TPS61096 产品说明书进行改装，从而满足特殊要求。

TPS61096 Unencrypted PSpice Transient Model Package (Rev. B)

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)