The TPS61180/1/2 ICs provide highly integrated solutions for media size LCD backlight. These devices have a built-in high efficiency boost regulator with integrated 1.5A/40V power MOSFET. The six current sink regulators provide high precision current regulation and matching. In total, the device can support up to 60 WLED. In addition, the boost output automatically adjusts its voltage to the WLED forward voltage to improve efficiency.

The devices support pulse width modulation (PWM) brightness dimming. During dimming, the WLED current is turned on/off at the duty cycle and frequency determined by the PWM signal input on the DCRTL pin. One potential issue of PWM dimming is audible noises from the output ceramic capacitors. The TPS61180/1/2 family is designed to minimize this output AC ripple across a wide dimming duty cycle and frequency range; therefore, reducing the audible noise.

The TPS61180/1/2 ICs provide a driver output for an external PFET connected between the input and inductor. During short circuit or over-current conditions, the ICs turn off the external PFET and disconnect the battery from the WLEDs. The PFET is also turned off during IC shutdown (true shutdown) to prevent any leakage current of the battery. The device also integrates over-voltage protection, soft-start and thermal shutdown.

The TPS61180 IC requires external 3.3V IC supply, while TPS61181 and TPS61182 ICs have a built-in linear regulator for the IC supply. All the devices are in a 3×3 mm QFN package.

• 5 V to 24 V Input Voltage
• Integrated 1.5 A 40V MOSFET
• 1.0 MHz/1.3 MHz Switching Frequency
• Boost Output Auto-Adaptive to WLED Voltages
• Small External Components
• Integrated Loop Compensation
• Six Current Sink of 25mA
• Up to 10 WLED in Series
• Less Than 3% Current Matching and Accuracy
• Up to 1000:1 PWM Brightness DImming Range
• Minimized Output Ripple Under PWM Dimming
• Driver for Input/Output Isolation PFET
• True Shutdown
• Over Voltage Protection
• WLED Open/Short Protection
• Built-in Soft Start
• 16L 3 mm×3 mm QFN

• Number of channels (#)
• 6
• Vin (Min) (V)
• 5
• Vin (Max) (V)
• 24
• Vout (Min) (V)
• 5
• Vout (Max) (V)
• 39
• Type
• Inductive
• Switching frequency (Max) (kHz)
• 1300
• LED current per channel (mA)
• 25
• Peak efficiency (%)
• 90
• Topology
• Boost
• Features
• Load Disconnect During Shutdown
• Operating temperature range (C)
• -40 to 85

TPS61182的完整型号有：TPS61182RTER、TPS61182RTET，以下是这些产品的关键参数及官网采购报价：

TPS61182RTER，工作温度：-40 to 85，封装：WQFN (RTE)-16，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS61182RTER的批量USD价格：.739（1000+）

TPS61182RTET，工作温度：-40 to 85，封装：WQFN (RTE)-16，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS61182RTET的批量USD价格：.887（1000+）

TPS61182EVM-259 — TPS61182EVM-259 评估模块

The TPS61182EVM-259 facilitates evaluation of the TPS61182 1.5A White LED Driver for Notebooks. The TPS61182 IC has a built-in high efficiency boost regulator with integrated 1.5A/40V power MOSFET. The six current sink regulators provide high precision current regulation and (...)

WLEDEVM-260 — WLEDEVM-260 评估模块

The WLEDEVM-260 load board contains 8white light emitting diode (WLED) banks/strings which contain either 10 or 12WLEDs as selected by the odd numbered jumpers (JP1, JP3, etc.). It is used with the TPS61181EVM-259 or TPS61182EVM-259 Evaluation Module to demonstrate functionality of the (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)