The TPS6124x device is a highly efficient synchronous step-up DC-DC converter optimized for products powered by either a three-cell alkaline, NiCd or NiMH, or one-cell Li-Ion or Li-Polymer battery. The TPS6124x supports output currents up to 450 mA. The TPS61240 has an input valley current limit of 500 mA, and the TPS61241 has an input valley current of 600 mA.

With an input voltage range of 2.3 V to 5.5 V, the device supports batteries with extended voltage range and are ideal to power portable applications like mobile phones and other portable equipment. The TPS6124x boost converter is based on a quasi-constant on-time valley current mode control scheme.

The TPS6124x presents a high impedance at the V_OUT pin when shut down. This allows for use in applications that require the regulated output bus to be driven by another supply while the TPS6124x is shut down.

During light loads the device will automatically pulse skip allowing maximum efficiency at lowest quiescent currents. In the shutdown mode, the current consumption is reduced to less than 1 µA.

TPS6124x allows the use of small inductors and capacitors to achieve a small solution size. During shutdown, the load is completely disconnected from the battery. The TPS6124x is available in a 6-pin DSBGA and 2-mm × 2-mm WSON package.

• Efficiency > 90% at Nominal Operating Conditions
• Total DC Output Voltage Accuracy 5.0 V±2%
• Typical 30-μA Quiescent Current
• Best in Class Line and Load Transient
• Wide VIN Range From 2.3 V to 5.5 V
• Output Current up to 450 mA
• Automatic PFM/PWM Mode Transition
• Low Ripple Power Save Mode for Improved Efficiency at Light Loads
• Internal Softstart, 250-μs Typical Start-Up Time
• 3.5-MHz Typical Operating Frequency
• Load Disconnect During Shutdown
• Current Overload and Thermal Shutdown Protection
• Three Surface-Mount External Components Required (One MLCC Inductor, Two Ceramic Capacitors)
• Total Solution Size <13 mm2
• Available in a 6-Pin DSBGA and 2-mm × 2-mm WSON Package

• Vin (Min) (V)
• 2.3
• Vin (Max) (V)
• 5.5
• Vout (Min) (V)
• 5
• Vout (Max) (V)
• 5
• Switch current limit (Typ) (A)
• 0.7
• Regulated outputs (#)
• 1
• Switching frequency (Min) (kHz)
• 3500
• Switching frequency (Max) (kHz)
• 3500
• Iq (Typ) (mA)
• 0.03
• Features
• Enable, Light Load Efficiency, Load Disconnect
• Duty cycle (Max) (%)
• 100
• Rating
• Catalog

TPS61241的完整型号有：TPS61241YFFR、TPS61241YFFT，以下是这些产品的关键参数及官网采购报价：

TPS61241YFFR，工作温度：-40 to 85，封装：DSBGA (YFF)-6，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS61241YFFR的批量USD价格：.33（1000+）

TPS61241YFFT，工作温度：-40 to 85，封装：DSBGA (YFF)-6，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS61241YFFT的批量USD价格：.396（1000+）

Encrypted TPS61241 PSpice Transient Model Package (Rev. A)

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)