The TPS6211x devices are a family of low-noise synchronous step-down dc-dc converters that are ideally suited for systems powered from a 2-cell Li-ion battery or from a 12 V or 15 V rail.

The TPS6211x is a synchronous PWM converter with integrated N-channel and P-channel power MOSFET switches. Synchronous rectification is used to increase efficiency and to reduce external component count. To achieve highest efficiency over a wide load current range, the converter enters a power-saving, pulse-frequency modulation (PFM) mode at light load currents. Operating frequency is typically 1 MHz, allowing the use of small inductor and capacitor values. The device can be synchronized to an external clock signal in the range of 0.8 MHz to 1.4 MHz. For low noise operation, the converter can be operated in PWM-only mode. In the shutdown mode, the current consumption is reduced to less than 2 µA. The TPS6211x is available in the 16 pin (RSA) QFN package, and operates over a free-air temperature range of –55°C to 125°C.

• Controlled Baseline
  • One Assembly
  • One Test Site
  • One Fabrication Site
• Extended Temperature Performance of –55°C to 125°C
• Enhanced Diminishing Manufacturing Sources (DMS) Support
• Enhanced Product-Change Notification
• Qualification Pedigree
• High-Efficiency Synchronous Step-Down Converter With up to 95% Efficiency
• 3.1 V to 17 V Operating Input Voltage Range
• Adjustable Output Voltage Range From 1.2 V to 16 V
• Fixed Output Voltage Options Available in 3.3 V and 5 V
• Synchronizable to External Clock Signal up to 1.4 MHz
• Up to 1.5 A Output Current
• High Efficiency Over a Wide Load Current Range Due to PFM/PWM Operation Mode
• 100% Maximum Duty Cycle for Lowest Dropout
• 20 μA Quiescent Current (Typical)
• Overtemperature and Overcurrent Protected
• Available in 16 Pin QFN Package
• APPLICATIONS
  • Point-of-Load Regulation From 12 V Bus
  • Organizers, PDAs, and Handheld PCs
  • Handheld Scanners

Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits. PowerPAD is a trademark of Texas Instruments.

• Vin (Min) (V)
• 3.1
• Vin (Max) (V)
• 17
• Vout (Min) (V)
• 3.3
• Vout (Max) (V)
• 3.3
• Iout (Max) (A)
• 1.5
• Iq (Typ) (uA)
• 20
• Switching frequency (Min) (kHz)
• 900
• Switching frequency (Max) (kHz)
• 1100
• Features
• Enable, Forced PWM, Frequency Synchronization, Light Load Efficiency, Power Good, Synchronous Rectification
• Rating
• HiRel Enhanced Product
• Regulated outputs (#)
• 1
• Control mode
• Voltage Mode
• Duty cycle (Max) (%)
• 100

TPS62111-EP的完整型号有：TPS62111MRSAREP、V62/07622-02XE，以下是这些产品的关键参数及官网采购报价：

TPS62111MRSAREP，工作温度：-55 to 125，封装：QFN (RSA)-16，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS62111MRSAREP的批量USD价格：2.75（1000+）

V62/07622-02XE，工作温度：-55 to 125，封装：QFN (RSA)-16，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网V62/07622-02XE的批量USD价格：2.75（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)