The TPS6235x device is a high-frequency synchronous step-down dc-dc converter optimized for battery-powered portable applications. Intended for low-power applications, the TPS6235x supports up to 800-mA load current and allows the use of small, low cost inductors and capacitors.

The device is ideal for mobile phones and similar portable applications powered by a single-cell Li-Ion battery. With an output voltage range adjustable via I²C interface down to 0.6 V, the device supports low-voltage DSPs and processors core power supplies in smart-phones, PDAs, and handheld computers.

The TPS6235x operates at 3-MHz fixed switching frequency and enters the efficiency optimized power-save mode operation at light load currents to maintain high efficiency over the entire load current range. In the shutdown mode, the current consumption is reduced to less than 2 µA.

The serial interface is compatible with Fast/Standard and High-Speed mode I²C specification allowing transfers at up to 3.4 Mbps. This communication interface is used for dynamic voltage scaling with voltage steps down to 12.5 mV, for reprogramming the mode of operation (Light PFM, Fast PFM or Forced PWM) or disable/enabling the output voltage.

• 88% Efficiency at 3-MHz Operation
• 800-mA Output Current at VI = 2.7 V
• 3-MHz Fixed Frequency Operation
• Best in Class Load and Line Transient
• Complete 1-mm Component Profile Solution
• ±2% PWM DC Voltage Accuracy
• 35-ns Minimum On-Time
• Efficiency Optimized Power-Save Mode (Light PFM)
• Transient Optimized Power-Save Mode (Fast PFM)
• 28-μA Typical Quiescent Current
• I2C Compatible Interface up to 3.4 Mbps
• Pin-Selectable Output Voltage
• Synchronizable On the Fly to External Clock Signal
• Available in a 10-Pin QFN (3 × 3 mm) and 12-Pin NanoFree? (CSP) Packaging
• APPLICATIONS
  • SmartReflex? Compliant Power Supply
  • Split Supply DSPs and μP Solutions OMAP?, XSCALE?
  • Cell Phones, Smart-Phones
  • PDAs, Pocket PCs
  • Digital Cameras
  • Micro DC-DC Converter Modules

NanoFree, SmartReflex, OMAP, PowerPAD Is a trademark of Texas Instruments. XSCALE is a trademark of Intel Corporation. I2C is a trademark of Philips Corporation.

• Vin (Min) (V)
• 2.7
• Vin (Max) (V)
• 5.5
• Vout (Min) (V)
• 0.75
• Vout (Max) (V)
• 1.5375
• Iout (Max) (A)
• 0.8
• Iq (Typ) (uA)
• 28
• Switching frequency (Min) (kHz)
• 2650
• Switching frequency (Max) (kHz)
• 3350
• Features
• Enable, Frequency Synchronization, I2C/PMBus, Light Load Efficiency, Output Discharge, Synchronous Rectification, Adaptive/Dynamic Voltage Scaling
• Rating
• Catalog
• Regulated outputs (#)
• 1
• Control mode
• Voltage Mode
• Duty cycle (Max) (%)
• 80

TPS62350的完整型号有：TPS62350YZGR、TPS62350YZGT，以下是这些产品的关键参数及官网采购报价：

TPS62350YZGR，工作温度：-40 to 85，封装：DSBGA (YZG)-12，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS62350YZGR的批量USD价格：.571（1000+）

TPS62350YZGT，工作温度：-40 to 85，封装：DSBGA (YZG)-12，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SNAGCU，TI官网TPS62350YZGT的批量USD价格：.685（1000+）

TPS62350EVM-201 — TPS62350EVM Evaluation Module

The TPS62350EVM-201 is an evaluation tool for the TPS62350 3MHz Synchronous Step-Down Converter optimized for battery powered applications with input voltages between 2.7V to 6V. The TPS62350 can supply voltages from 0.75V to 1.5375V at 800mA and offers a 3.4Mbps I2C serial interface for (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)