The TPS6240x family of devices are synchronous dual step-down DC-DC converters optimized for battery-powered portable applications. The devices provide two independent output voltage rails powered by 1-cell Li-Ion or 3-cell NiMH/NiCD batteries. The devices are also suitable to operate from a standard 3.3-V or 5-V voltage rail.

With an input voltage range from 2.5 V to 6 V, the TPS62400 is ideal to power portable applications like smart phones, PDAs, and other portable equipment.

With the EasyScale serial interface the output voltages can be modified during operation. The fixed output voltage versions TPS62401, TPS62402, TPS62403, and TPS62404 support one-pin controlled simple Dynamic Voltage Scaling for low-power processors.

The TPS6240x operates at a 2.25-MHz fixed switching frequency and enters the power save mode operation at light load currents to maintain high efficiency over the entire load current range. For low noise applications the devices can be forced into fixed frequency PWM mode by pulling the MODE/DATA pin high. In the shutdown mode, the current consumption is reduced to 1.2 µA, typical. The devices allow the use of small inductors and capacitors to achieve a small solution size.

The TPS62400 is available in a 10-pin leadless package (3-mm × 3-mm VSON)

• High Efficiency—Up to 95%
• VIN Range From 2.5 V to 6 V
• 2.25-MHz Fixed Frequency Operation
• Output Current of 400 mA and 600 mA
• Adjustable Output Voltage From 0.6V to VIN
• Pin-Selectable Output Voltage Supports Simple Dynamic Voltage Scaling
• EasyScale Optional One-Pin Serial Interface
• Power Save Mode at Light Load Currents
• 180° Out-of-Phase Operation
• Output Voltage Accuracy in PWM Mode ±1%
• Typical 32-μA Quiescent Current for Both Converters
• 100% Duty Cycle for Lowest Dropout
• Available in a 10-Pin VSON (3 mm × 3 mm)
• APPLICATIONS
  • Cell Phones, Smart Phones
  • PDAs, Pocket PCs
  • OMAP and Low-Power DSP Supply
  • Portable Media Players
  • Digital Radios
  • Digital Cameras

All other trademarks are the property of their respective owners

• Vin (Min) (V)
• 2.5
• Vin (Max) (V)
• 6
• Vout (Min) (V)
• 1.1
• Vout (Max) (V)
• 1.575
• Iout (Max) (A)
• 0.4
• Iq (Typ) (uA)
• 32
• Switching frequency (Min) (kHz)
• 2000
• Switching frequency (Max) (kHz)
• 2500
• Features
• Enable, Forced PWM, Light Load Efficiency, Synchronous Rectification, Adaptive/Dynamic Voltage Scaling
• Rating
• Catalog
• Regulated outputs (#)
• 2
• Control mode
• Voltage Mode
• Duty cycle (Max) (%)
• 100

TPS62401的完整型号有：TPS62401DRCR、TPS62401DRCT，以下是这些产品的关键参数及官网采购报价：

TPS62401DRCR，工作温度：-40 to 85，封装：VSON (DRC)-10，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS62401DRCR的批量USD价格：.609（1000+）

TPS62401DRCT，工作温度：-40 to 85，封装：VSON (DRC)-10，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网TPS62401DRCT的批量USD价格：.731（1000+）

TPS62401EVM-167 — TPS62401 评估模块

The TPS62401EVM-167 is an evaluation tool for the TPS62401 which is a 2.25MHz dual, step down converter in a small 3x3mm2 QFN package. The TPS62401 has a 2.5V to 6V input voltage supply and offers fixed output voltages of 1.1V/1.575V at 400mA and 1.8V at (...)

TPS62420EVM-167 — TPS62420 评估模块

The TPS62420EVM-167 is an evaluation tool for the TPS62420 which is a 2.25MHz dual, step down converter in a small 3x3mm2 QFN package. The TPS62420 can supply voltages from 0.6V to 6V from a 2.5V to 6V input, and provides two output rails of up to (...)

TPS624xxEVM-167 Setup Software

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)