- 制造厂商:TI
- 产品类别:电源管理
- 技术类目:直流/直流开关稳压器 - 降压稳压器
- 功能描述:适用于低输入电压的可调节、效率为 96% 的 1.5A 降压转换器
- 点击这里打开及下载TPS62510的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The TPS62510 is a high-efficiency step-down converter targeted for operation from a 1.8-V to 3.8-V input voltage rail, ideally suited for 2-cell alkaline or NiMHd applications. The TPS62510 is also ideal as a point-of-load regulator running from a fixed 3.3-V, 2.5-V, or 1.8-V input voltage rail.
The converter operates in fixed frequency pulse width modulation (PWM) mode switching at 1.5 MHz with the MODE pin high. Pulling the MODE pin low enables the high efficiency mode. In high efficiency mode, the device operates with a 1.5-MHz fixed frequency PWM at nominal load current, and automatically enters the power save mode at light load currents. For maximum system reliability, the converter features output voltage tracking using the OVT pin to allow sequencing, and to allow for the output voltage to track an external voltage applied to this pin.
The TPS62510 is available in a 3-mm × 3-mm 10-pin VSON package.
- 1.8-V to 3.8-V Input Voltage Range
- Up to 96% High Efficiency Synchronous Step- Down Converter
- 1.5-MHz Fixed Frequency PWM Operation
- 1% Output Voltage Accuracy in Fixed Frequency PWM Mode
- Power Save Mode Operation for High Efficiency Over the Entire Load Current Range
- 22-μA Quiescent Current
- Adjustable Output Voltage
- Output Voltage Tracking (OVT) for Reliable Sequencing
- Available in a 3-mm × 3-mm 10-Pin VSON Package
- Vin (Min) (V)
- 1.8
- Vin (Max) (V)
- 3.8
- Vout (Min) (V)
- 0.6
- Vout (Max) (V)
- 3.8
- Iout (Max) (A)
- 1.5
- Iq (Typ) (uA)
- 18
- Switching frequency (Min) (kHz)
- 1150
- Switching frequency (Max) (kHz)
- 2250
- Features
- Enable, Forced PWM, Light Load Efficiency, Power Good, Synchronous Rectification, Tracking
- Rating
- Catalog
- Regulated outputs (#)
- 1
- Control mode
- Voltage Mode
- Duty cycle (Max) (%)
- 100
TPS62510的完整型号有:TPS62510DRCR、TPS62510DRCT,以下是这些产品的关键参数及官网采购报价:
TPS62510DRCR,工作温度:-40 to 85,封装:VSON (DRC)-10,包装数量MPQ:3000个,MSL 等级/回流焊峰值温度:Level-2-260C-1 YEAR,引脚镀层/焊球材料:NIPDAU,TI官网TPS62510DRCR的批量USD价格:.668(1000+)
TPS62510DRCT,工作温度:-40 to 85,封装:VSON (DRC)-10,包装数量MPQ:250个,MSL 等级/回流焊峰值温度:Level-2-260C-1 YEAR,引脚镀层/焊球材料:NIPDAU,TI官网TPS62510DRCT的批量USD价格:.802(1000+)
TPS62510EVM-168 — TPS62510 Evaluation Module
The TPS62510EVM-168 is an evaluation tools for the TPS62510 97% efficiency, 1.5A Buck converter optimized for 2-cell Alkaline or NiMHd applications. The TPS62510 can supply voltages from 0.6V to 3.8V and offers both a fixed frequency PWM mode or high efficiency PWM mode. The (...)
TPS62510 Unencrypted PSpice Transient Model Package (Rev. A)
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)